• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Pics of ROUSCHARGER INSTALL

  • Thread starter Thread starter toolttime
  • Start date Start date Dec 30, 2005
  • 1
  • 2
Next
1 of 2 Next Last

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Dec 30, 2005
#1
  • Dec 30, 2005
  • #1
Here are pics we have taken during our install. Basically the first part is modifiing, like moving wire connectors, heater hoses, alternator air box . etc. 2nd part is preassemble, intake w intercooler, cooler for front of rad , etc. This is where we are at at now. On the weekend we have to baisically remove front of car to install coller. The parts are well packaged and maked. Instructiobns so far are pretty clear.
 

Attachments

  • superchargerproject 031.webp
    34.3 KB · Views: 197
  • superchargerproject 032.webp
    24.5 KB · Views: 199

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Dec 30, 2005
#2
  • Dec 30, 2005
  • #2
some more. sucks you can only do 2 pics at atime
 

Attachments

  • superchargerproject 042.webp
    35.2 KB · Views: 190
  • superchargerproject 054.webp
    27.2 KB · Views: 179

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Dec 30, 2005
#3
  • Dec 30, 2005
  • #3
a few more
 

Attachments

  • superchargerproject 081.webp
    37.3 KB · Views: 165
  • superchargerproject 084.webp
    24.3 KB · Views: 186

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Dec 30, 2005
#4
  • Dec 30, 2005
  • #4
yet a few more I only have about 60 pics of install so far
 

Attachments

  • superchargerproject 090.webp
    17.8 KB · Views: 190
  • superchargerproject 092.webp
    14.6 KB · Views: 168

05canuck

Member
Apr 1, 2005
82
0
6
Dec 30, 2005
#5
  • Dec 30, 2005
  • #5
Very cool man..can't wait to give it a look. Keep the pics coming.
 

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Dec 30, 2005
#6
  • Dec 30, 2005
  • #6
05canuck said:
Very cool man..can't wait to give it a look. Keep the pics coming.
Click to expand...
I pretty well took a pic of everything we have done but don't have enough room to down load on this forum. Don't know if there is a different way to do pics on here.
 

05STG1

New Member
Dec 20, 2005
13
0
0
Dec 30, 2005
#7
  • Dec 30, 2005
  • #7
Nice! Enjoy.. My STG 1 is jealous

2 pics @ a time could get realy annoying...real quick.
 

2002whitegt

Founding Member
May 31, 2002
179
12
19
Houston TX
Dec 30, 2005
#8
  • Dec 30, 2005
  • #8
go to photobucket.com register load photos there and link them to the board.

The install is looking nice BTW
 

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Dec 30, 2005
#9
  • Dec 30, 2005
  • #9
05STG1 said:
Nice! Enjoy.. My STG 1 is jealous

2 pics @ a time could get realy annoying...real quick.
Click to expand...

I like the color of your car
 

Ernad

celibate sans pants
Apr 2, 2004
0
1
0
Grand Rapids, MI
Dec 30, 2005
#10
  • Dec 30, 2005
  • #10
2002whitegt said:
go to photobucket.com register load photos there and link them to the board.

The install is looking nice BTW
Click to expand...
:Word:


And nice documentation
 

05canuck

Member
Apr 1, 2005
82
0
6
Dec 30, 2005
#11
  • Dec 30, 2005
  • #11
Great pics..keep them coming
 

05STG1

New Member
Dec 20, 2005
13
0
0
Dec 30, 2005
#12
  • Dec 30, 2005
  • #12
toolttime said:
I like the color of your car
Click to expand...

LOL..ditto! We have Good taste
 

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Dec 30, 2005
#13
  • Dec 30, 2005
  • #13
Keep checking in I will have the complete install with pics in this thread
 

bigcat

start with the upper hole, and if more traction is
May 1, 2005
3,015
1
79
7200 feet
Dec 30, 2005
#14
  • Dec 30, 2005
  • #14
if you use a photo hosting service like photobucket (which was mentioned earlier), you can show up to 20 images per reply. this would be the best use of your time, and easier too.
 

Mossberg

Active Member
Jul 21, 2003
0
1
36
ATL, Shawty
Dec 30, 2005
#15
  • Dec 30, 2005
  • #15
mustangmods.com hosts for free as well.
 

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Dec 31, 2005
#16
  • Dec 31, 2005
  • #16
CPU back from roush today I was suprised it is here already since I had sent on Friday the 23 december with xmas in between. They have there sticker on it so it must have made it there. Roush does the reflash on the cpu as part of the package. They have a prepaid Fedex box in the kit to send to roush


 

Attachments

  • DCP02554.webp
    27.4 KB · Views: 94

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Jan 1, 2006
#17
  • Jan 1, 2006
  • #17
Well the last day of 05 and we started of by mounting the water tank for intercooler


Then we jacked up car took off front wheels to be able to remove front half of inner fenders and the front bumper. Actually remove the front of the car was probably the easiest thing we have done. This is to install the cooler for intercooler.



G]



[

 

Attachments

  • superchargerproject097.webp
    37.2 KB · Views: 92
  • superchargerproject098.webp
    26.7 KB · Views: 95
  • superchargerproject105.webp
    17 KB · Views: 100
  • superchargerproject108.webp
    25.7 KB · Views: 89
  • superchargerproject106.webp
    10.3 KB · Views: 88

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Jan 1, 2006
#18
  • Jan 1, 2006
  • #18
We now installed the cooler and I must say the way it was built was like it came right from ford themselves it was perfect fit. We removed the crush beam
(styrofoam lol)from the front . Removed the 2 inside bumper bolts. this is where the cooler mounts. We then installed the 2 supllied hoses to the engine compartment on paseenger side the other to the drivers side fender area. this is where the water pump for inter cooler goes. On the pump side we had to cut a few inches of hose off at a time to get the kinks out of the hose.


























Had to adjust a/c lines to make sure they didn't rub against cooler

 

Attachments

  • superchargerproject113.webp
    22.8 KB · Views: 95
  • superchargerproject112.webp
    18.5 KB · Views: 101
  • superchargerproject096.webp
    9 KB · Views: 99
  • superchargerproject115.webp
    11.5 KB · Views: 86
  • superchargerproject116.webp
    16.9 KB · Views: 91
  • superchargerproject117.webp
    13.2 KB · Views: 94
  • superchargerproject119.webp
    20.3 KB · Views: 97
  • superchargerproject122.webp
    25.3 KB · Views: 102
  • superchargerproject121.webp
    17.4 KB · Views: 108
  • superchargerproject120.webp
    18.5 KB · Views: 98
  • superchargerproject124.webp
    13.5 KB · Views: 95

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Jan 1, 2006
#19
  • Jan 1, 2006
  • #19
Here's the intercooler water pump and bracket. We had to remove a plug from close to cpu and cut of a red wire. We then solderd the supllied harness for pump and ran near top of rad to the drivers side.










 

Attachments

  • superchargerproject126.webp
    12.6 KB · Views: 98
  • superchargerproject127.webp
    26.8 KB · Views: 96
  • superchargerproject128.webp
    18.7 KB · Views: 121
  • superchargerproject129.webp
    27.6 KB · Views: 89

toolttime

New Member
Dec 17, 2005
59
0
0
Alberta Canada
Jan 1, 2006
#20
  • Jan 1, 2006
  • #20
Next we installed the supplied cooler autolite spark plugs. the order They do things in the instructions seem to make things easier to do. Like the spark plugs we be a little tight with everything on to change.







we then reinstalled the cooler lines we haad to modify into water pump under intake. Remove tape and clean the surface area to insatl the intake





 

Attachments

  • superchargerproject136.webp
    34.6 KB · Views: 86
  • superchargerproject135.webp
    31.9 KB · Views: 115
  • superchargerproject132.webp
    30.1 KB · Views: 90
  • superchargerproject130.webp
    13 KB · Views: 87
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
589
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
170
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
515
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Progress Thread 1993 LX Hatch Progress
  • Mac131
  • Aug 24, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 9 10 11
Replies
210
Views
12K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 15, 2026
Mac131
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?