• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Pictures of Emerald green LX coupes.

  • Thread starter Thread starter Project 77
  • Start date Start date Oct 24, 2010
Prev
  • 1
  • 2
First Prev 2 of 2

Notchbck93

New Member
Dec 9, 2003
422
1
0
IL
Oct 28, 2010
#21
  • Oct 28, 2010
  • #21
Project 77 said:
What about a top end kit from trick flow? all the parts you need minus the injectors and meter, in one package.
Click to expand...

Trick Flow offers a fine product...the key is to stick with a proven package.

If your car runs ok for now, start upgrading the upper and lower arms in the rear, get the poly bushings for the ears on the 8.8 and some new spring isolators while you are at it.

Next pre investment would be a bigger fuel pump and a nice kirban FPR. I've run Aero and Holleys and both have failed.

If you have the stock clutch, grab a king cobra and start breaking it in now; resurface the flywheel of course.

UPR makes a nice quick release quadrant over the stock platic ratcheting pawl. Get the extreme firewall adj, and QR quadrant. I think a few have complained about UPR's cable quality so you may want to source out a different adj one.

Pro 5.0 Shifter is a nice upgrade.


I would get these upgrades out of the way first before I touched the engine; again, this is my opinion after having built two Foxes.
 

Project 77

Founding Member
Jun 30, 2002
370
2
16
Bernville PA
Oct 28, 2010
#22
  • Oct 28, 2010
  • #22
Notchbck93 said:
Trick Flow offers a fine product...the key is to stick with a proven package.

If your car runs ok for now, start upgrading the upper and lower arms in the rear, get the poly bushings for the ears on the 8.8 and some new spring isolators while you are at it.

Next pre investment would be a bigger fuel pump and a nice kirban FPR. I've run Aero and Holleys and both have failed.

If you have the stock clutch, grab a king cobra and start breaking it in now; resurface the flywheel of course.

UPR makes a nice quick release quadrant over the stock platic ratcheting pawl. Get the extreme firewall adj, and QR quadrant. I think a few have complained about UPR's cable quality so you may want to source out a different adj one.

Pro 5.0 Shifter is a nice upgrade.


I would get these upgrades out of the way first before I touched the engine; again, this is my opinion after having built two Foxes.
Click to expand...

This is VERY good advice, I can;t tell you how many times I see high HP cars that have no suspension work or brake work done to help control all that HP. I think I'll be selling my 78 King Cobra to help pay for the upgrades to this coupe.
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Oct 28, 2010
#23
  • Oct 28, 2010
  • #23
What do you plan to do to the coupe P77?
 

Project 77

Founding Member
Jun 30, 2002
370
2
16
Bernville PA
Oct 28, 2010
#24
  • Oct 28, 2010
  • #24
well that depends now...I was just offered a 2001 Saleen S281 with 60K miles for a very good price, might have to sell this coupe AND the King. I wanted 350 HP, in a nice presentable car, I don't really do flashy so stock look is OK, paint it the same emerald green and drive it.
 

Notchbck93

New Member
Dec 9, 2003
422
1
0
IL
Oct 29, 2010
#25
  • Oct 29, 2010
  • #25
Project 77 said:
well that depends now...I was just offered a 2001 Saleen S281 with 60K miles for a very good price, might have to sell this coupe AND the King. I wanted 350 HP, in a nice presentable car, I don't really do flashy so stock look is OK, paint it the same emerald green and drive it.
Click to expand...

Don't get me wrong, I like coupes as well as a lot of other people, but your '77, if it is in fact the one in your avatar, looks mighty fine. Personally, I'd hang onto the King, because you see even less of those on the road than you do Fox coupes. You could always do something to yours like this one:





These were borrowed from Mike Post's website, the guy who dyno tuned my Notch.

Testimonials
 

Project 77

Founding Member
Jun 30, 2002
370
2
16
Bernville PA
Oct 29, 2010
#26
  • Oct 29, 2010
  • #26
That Cobra II with the blower is sick, he posts over on mustangii.net. I'll post a picture up of my king, she is bright and draws alot of attention. The car in my Avatar is a Cobra II I sold last summer, it was original down to the plug wires and oil filter, nice car but very slow.
 

Attachments

  • mustangstuff 127.webp
    47.2 KB · Views: 192
  • mustangstuff 134.webp
    33.4 KB · Views: 205

Notchbck93

New Member
Dec 9, 2003
422
1
0
IL
Oct 29, 2010
#27
  • Oct 29, 2010
  • #27
I like the continuation of body color under the hood as well. She looks to be rediculously clean!

The remote air filter is a nice set up.
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Oct 29, 2010
#28
  • Oct 29, 2010
  • #28
The II's never really appealed to me, but man those cars are clean.
 
M

Monkey#39

Member
Jun 5, 2010
29
1
16
CObble Hill BC
Nov 2, 2010
#29
  • Nov 2, 2010
  • #29
Im probally the only one but I love saleen wings on all foxes.. its the perfect size.. I have one on my GT vert
 

santos

Founding Member
Dec 11, 1999
362
19
39
Camp Hill, PA
Nov 10, 2010
#30
  • Nov 10, 2010
  • #30
its not a notch, but its in my sig
 

coupeownerBE

Active Member
Aug 20, 2005
110
2
29
russellivlle,ar
Dec 7, 2010
#31
  • Dec 7, 2010
  • #31
Notchbck93 said:
Don't get me wrong, I like coupes as well as a lot of other people, but your '77, if it is in fact the one in your avatar, looks mighty fine. Personally, I'd hang onto the King, because you see even less of those on the road than you do Fox coupes. You could always do something to yours like this one:





These were borrowed from Mike Post's website, the guy who dyno tuned my Notch.

Testimonials
Click to expand...

im sorry but that car is awful.. the motor is badass but the car is gross
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Dec 7, 2010
#32
  • Dec 7, 2010
  • #32
Notchbck93 said:
Nothing wrong with a 347.

Smaller runners will help with better economy though.

If you are thinking turbo, those guys are making some serious torque with stock everything. Pretty much the same torque I'm making and a little less hp, but talk about a wicked street combo.

Turbos or any power adder can be more maintenance and more of a headache on a DD.

Most have agreed that a fun DD package would be a set of thumper heads, cobra intake, 65 mm t-bod, a Cobra bumpstick. Great throttle response, high 12 second possibility on a slick, yet purrs like a kitten when your stuck in traffic. 24lb injector and a 75 mm maf.

If I had to build a DD Fox, it's how I would do it.
Click to expand...

Notchbck93 said:
Trick Flow offers a fine product...the key is to stick with a proven package.

If your car runs ok for now, start upgrading the upper and lower arms in the rear, get the poly bushings for the ears on the 8.8 and some new spring isolators while you are at it.

Next pre investment would be a bigger fuel pump and a nice kirban FPR. I've run Aero and Holleys and both have failed.

If you have the stock clutch, grab a king cobra and start breaking it in now; resurface the flywheel of course.

UPR makes a nice quick release quadrant over the stock platic ratcheting pawl. Get the extreme firewall adj, and QR quadrant. I think a few have complained about UPR's cable quality so you may want to source out a different adj one.

Pro 5.0 Shifter is a nice upgrade.


I would get these upgrades out of the way first before I touched the engine; again, this is my opinion after having built two Foxes.
Click to expand...

you literally just built my car, and yes, it is fun! she runs great for what she is

308 built by me, Ross forged slugs, cobra intake, Thumpers w/ 1.94/1.6s, Anderson n-412 cam, 65mm tb, proflow 75mm maf, 3.5" power pipe, 24# inj, 255lph fp, 1.6 rr's, kirban afpr, u/d pullies, no a/c or smog, taurus fan w/ DC control, KC clutch, pro 5.0, 4.10s, hedman L/Ts, 2.5" H pipe, spintech prostreets, alum d/s, MAC c/c plates, MSD 6al w/ blaster coil, Taylor ThunderVolt wires, 3G alt, full-length sfc, UPR uca's/lca's, tokico struts, strange 10-way shocks, maxspeed springs, HID 5000k
 
S

sbm713

New Member
Nov 27, 2009
26
0
1
Blairsville Ga
Dec 10, 2010
#33
  • Dec 10, 2010
  • #33
well he hit the freaking nail on the head with those mods list huh haha
 

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,126
3,091
214
Cedar Rapids, Iowa
Dec 19, 2010
#34
  • Dec 19, 2010
  • #34
OP, have you started any work on the coupe?
 

Shaolin Crane

Banned
Oct 6, 2008
2,627
7
0
Kommiefornia
Dec 19, 2010
#35
  • Dec 19, 2010
  • #35
OP if you like the look of the Saleen coupe, do it. Who the **** are these people to say you CANT do something on your car. Hell i know im gonna get **** about the big ass laser cut wing for my car. But **** em.
 

srtthis

the guy doing it does every local racers rear end
15 Year Member
Jul 3, 2009
5,129
1,666
204
Maryland
Dec 19, 2010
#36
  • Dec 19, 2010
  • #36
Shaolin Crane said:
OP if you like the look of the Saleen coupe, do it. Who the **** are these people to say you CANT do something on your car. Hell i know im gonna get **** about the big ass laser cut wing for my car. But **** em.
Click to expand...

i will be doing one on my LX soon. prob wait to do it when i get a fiberglass hatch. but it will still be a street car
 

Shaolin Crane

Banned
Oct 6, 2008
2,627
7
0
Kommiefornia
Dec 19, 2010
#37
  • Dec 19, 2010
  • #37
srtthis said:
i will be doing one on my LX soon. prob wait to do it when i get a fiberglass hatch. but it will still be a street car
Click to expand...

haha im sure your wing will be much different than mine
 

bynummustang

Seen my other Jackstand?
Jul 24, 2005
1
2
69
NC State University
Dec 19, 2010
#38
  • Dec 19, 2010
  • #38
Who's got a picture of Mike's old coupe? TT91 USED to be his name, then something with Saleen, the old guys should know the car.
 

srtthis

the guy doing it does every local racers rear end
15 Year Member
Jul 3, 2009
5,129
1,666
204
Maryland
Dec 19, 2010
#39
  • Dec 19, 2010
  • #39
Shaolin Crane said:
haha im sure your wing will be much different than mine
Click to expand...

yea yours will be up a bit higher then mine... mine will be hanging out the back
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
627
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
R
Fox Foxbody Notchback Coupe 1979
  • robrouck
  • Apr 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
305
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 20, 2026
slow84lx
S
Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
771
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
533
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 6, 2026
85GT4V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?