Plastic Intake Manifold

LightningWhite · May 4, 2009

A friend of mine recently purchased a plastic upper intake manifold from a guy that was parting out his wrecked mustang. The intake has Barely Legal Motorsports stamped on the top of it. Neither him or me have heard of this company before and I couldn't find any information about it online. It bolts directly ontop of the stock manifold. Has anybody ever heard of this upper intake or company?

stykthyn · May 4, 2009

is it a box intake?

Darkwriter77 · May 4, 2009

Probably just a knock-off of that polymer intake that Comp sold through Summit and Jeg's awhile back, which I think they stopped carrying. The intake's only nice feature was that it supposedly made changing out valve cover gaskets easier; aside from that, it sucked, because you're still flow-limited by the stock lower intake (unless of course you port it), and you lose a lot of low-end grunt.

I wouldn't mess with it.

stykthyn · May 4, 2009

in a blown app or high rev stroker the polymer intake was a good match, unfortunately you were still confined to a gt40 intake

LightningWhite · May 4, 2009

Yes it is a box style intake. I just never heard of the company or could find any information on it and was wondering if anyone here had heard of it.

old_blue · May 5, 2009

might just be a company sticker or badge on it. comp was the big name in the plastic boxed uppers.

KamiKaziDK · May 5, 2009

Comp or Harwood(which I think was a comp anyways)

white 89 GT · May 5, 2009

Have the stock lower ported and use that upper, and then go kick butt on the high priced intakes. Don`t need grunt when racing, your above 4k all the time.

Darkwriter77 · May 5, 2009

white 89 GT said:
Have the stock lower ported and use that upper, and then go kick butt on the high priced intakes. Don`t need grunt when racing, your above 4k all the time.

Depends on how he intends to use his car. If it's a track-only car, then yeah, I agree ... although it'd still be good to have some bottom-end to get things moving off the line, unless you're going with forced induction. But if you're planning on using this on a street car, not for street racing but just for cruising around and spirited acceleration and such, dropping a lot of bottom-end out will make the car feel like a total dog.

There are MUCH better intakes and setups out there, either way. I'd sooner go with an Explorer intake than one of those plastic doohickies, myself.

KamiKaziDK · May 5, 2009

Darkwriter77 said:
Depends on how he intends to use his car. If it's a track-only car, then yeah, I agree ... although it'd still be good to have some bottom-end to get things moving off the line, unless you're going with forced induction. But if you're planning on using this on a street car, not for street racing but just for cruising around and spirited acceleration and such, dropping a lot of bottom-end out will make the car feel like a total dog.

There are MUCH better intakes and setups out there, either way. I'd sooner go with an Explorer intake than one of those plastic doohickies, myself.

+1

LaserSVT · May 5, 2009

You know what would be really cool? A freakin picture of the damn thing!!! Damn n00bs

Plastic Intake Manifold

LightningWhite

New Member

stykthyn

I want to measure mine. It doesn't look that tall.

Darkwriter77

Resident Ranting Negative Nancy

stykthyn

I want to measure mine. It doesn't look that tall.

LightningWhite

New Member

old_blue

KamiKaziDK

Member

white 89 GT

Member

Darkwriter77

Resident Ranting Negative Nancy

KamiKaziDK

Member

LaserSVT

Got FB banned again for saying nards

Similar threads

Plastic Intake Manifold

New Member

I want to measure mine. It doesn't look that tall.

Resident Ranting Negative Nancy

I want to measure mine. It doesn't look that tall.

New Member

Member

Member

Resident Ranting Negative Nancy

Member

Got FB banned again for saying nards

Similar threads

Privacy & Transparency

Privacy & Transparency