post pics of your different emblems

Gearbanger 101 · Feb 28, 2007

AmBo said:

What are the "supercharged" emblems from and where did you get them?

all4ford · Feb 28, 2007

Mustang5L5 said:
I had that peice as well. My car is also an early '03 as well.

Here it is removed as I put the full grill delete on my stang

Looks MUCH better than that honeycomb crap

I have a 2000 GT and i have that same crap as well, I took it off and did the billet grille

04DarkShadowGT · Feb 28, 2007

Gearbanger 101 said:
What are the "supercharged" emblems from and where did you get them?

They are from a Cobalt SS. You can get them on ebay.

AmBo · Mar 1, 2007

04DarkShadowGT said:
They are from a Cobalt SS. You can get them on ebay.

Good job! You're the first person to pickup where they are from! 10 points to DarkShadow!

deftsound · Mar 1, 2007

04DarkShadowGT · Mar 1, 2007

AmBo said:
Good job! You're the first person to pickup where they are from! 10 points to DarkShadow!

I just know that because I really like the Cobalt SS. Id rock one for a DD.

ban-one · Mar 2, 2007

here is mine

get me alot of funny looks especially when i have my cb antenna mounted on my trunk and crusing down the interstate at 85 mph

http://i149.photobucket.com/albums/s58/journey1381/070220030320.jpg

http://i149.photobucket.com/albums/s58/journey1381/070220030310.jpg

CRZYHRSGT · Mar 3, 2007

They're a work in progress. I believe Scott Drake (maker of A LOT of repro. items for older Stangs) makes the running pony emblem with a 4.6 on top.
However, since the original cars only had cubic inches I opted not to get those. Instead I got a pair of 289s that had mis-painted bars on them for
cheap on ebay, filled in most of the 9, used the old Dremel and next they're getting re-chromed. This is where I am so far...

View attachment 399339

XxMustang281xX · Mar 3, 2007

thats freakin awesome! i want some with the 4.6, is there a website I can get them from???

CRZYHRSGT · Mar 4, 2007

www.scottdrake.net

myponyrocks · Mar 10, 2007

I don't have it like this any more, but used some primer, model paint, and lots of clear, held up longer than the pony did Siliconed to my grille.

Ya can't really see it but I added a bit of grey to the mane, tail, and hooves... and obviously it's ebil with the red eye

topless98gt · Mar 10, 2007

I'm redoing mine :\ I'm not sure I like the black, let alone that they are uneven!

Anyone know of a good way to even them out?

XxMustang281xX · Mar 10, 2007

we should make this a sticky, haha

Gearbanger 101 · Mar 11, 2007

This is the only non-stock emblem I've got on my car. Right across the pass side corner of my trunk lid....

Mustang5L5 · Mar 11, 2007

CRZYHRSGT said:
www.scottdrake.net

Wow i really like that a lot. I might pick up a pair. I'm just concerned about the size. I wsant them to stay roughly the same size as the V6 emblems i have now.

I just would like the 4.6 or 281 on them so i don't have to hear the "Is that a V6" comments anymore.

Too bad no companies make a 281. You would think they would considering they make them for every other displacement.

CRZYHRSGT · Mar 11, 2007

Mustang5L5 said:
Wow i really like that a lot. I might pick up a pair. I'm just concerned about the size. I wsant them to stay roughly the same size as the V6 emblems i have now.

I just would like the 4.6 or 281 on them so i don't have to hear the "Is that a V6" comments anymore.

Too bad no companies make a 281. You would think they would considering they make them for every other displacement.

The 289 one that I'm converting to 281 is a tad bigger, not just in height but all-around. The extra size might also act as a V-6 question deterrent . It did have different posts on the back that I had to cut off but it is metal which makes it a little heavier-duty.

Speaking of "classic" emblems...this is what I used to have (sorry 'bout the crappy pic). It was originally a fender emblem from a '66 Mustang GT...

View attachment 397247

san~man · Mar 12, 2007

CRZYHRSGT said:
The 289 one that I'm converting to 281 is a tad bigger, not just in height but all-around. The extra size might also act as a V-6 question deterrent . It did have different posts on the back that I had to cut off but it is metal which makes it a little heavier-duty.

Speaking of "classic" emblems...this is what I used to have (sorry 'bout the crappy pic). It was originally a fender emblem from a '66 Mustang GT...

View attachment 397159

I had bought those too off eBay, but to everyone who buys a Scott Drake emblem, beware: the rear of the emblem is not totally flat like the newer body emblems. Meaning, you'd have to fill in the back of the emblem with bodyfiller or something similar, sand it down, and then put on the two way stick tape to mount it. Furthermore, the mounting posts on the back don't match the new body Mustangs, nor is the post diameter the same size.

Rather than go through all the trouble, I returned them.

Supradude26 · Mar 12, 2007

I just blacked everything out on the rear...

topless98gt · Mar 12, 2007

Supradude26 said:
I just blacked everything out on the rear...

Thanks!

*will have SWEET and SEXUAL dreams tonight about Supradude26's Kewbra*

post pics of your different emblems

Active Member

Attachments

Straight Outta Locash

Attachments

New Member

Member

Active Member

Please ask me how much my supercharger cost

Member

Member

New Member

Member

New Member

I have more billet on the Stang than most women ha

Adhesive Feces

Member

Straight Outta Locash

That is…until I whipped out my Bissell

Attachments

New Member

O-G

New Member

Attachments

Adhesive Feces

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency