Power Estimates on new setup:

Stangt00

New Member

Oct 6, 2003

50

0

0

Apr 18, 2004

#1

• Apr 18, 2004

• #1

Got a whole new setup gonna be installed this week. Hoping someone with a similar setup has some inputs as to what to expect when it's all done.

Pro-M 80mm Mass air
Bullit stage 1 ported intake (whole kit)
VT stage 1 ported heads
VT stage 2 cams
FMS shorty headers
Bassani O/R X-pipe
Magnaflow Catback
Underdrive pullies
Dyno tuned of coarse

This should break 300 with a nice curve. Some inputs please

 

krly79

Member

May 6, 2003

464

0

16

VA Beach & So Illinois

Apr 18, 2004

#2

• Apr 18, 2004

• #2

I say around 316rwhp

 

snoopy98

Founding Member

May 11, 2002

518

0

0

florida,jacksonville

Apr 18, 2004

#3

• Apr 18, 2004

• #3

490 rwhp hehehehe

 

D

DrK MrK iV

New Member

Jan 11, 2004

271

0

0

Charlotte

Apr 18, 2004

#4

• Apr 18, 2004

• #4

309

 

Beau

Founding Member

Jan 29, 2000

3,050

0

0

San Diego

Apr 18, 2004

#5

• Apr 18, 2004

• #5

315.567 rwhp 331.2661 rwtq

 

Stangt00

New Member

Oct 6, 2003

50

0

0

Apr 18, 2004

#6

• Apr 18, 2004

• #6

snoopy98 said:

490 rwhp hehehehe

Click to expand...

Maybe one day with a supercharger , but not N/A

 

LS2 KLR

Member

Apr 16, 2003

452

0

17

Houston, TX

Apr 18, 2004

#7

• Apr 18, 2004

• #7

I'd say maybe 310.

 

0

00gtconv

Founding Member

Oct 25, 2002

516

0

0

Apr 18, 2004

#8

• Apr 18, 2004

• #8

Woa

Hold on, dont get upset when you put it on the dyno.

You should expect to gain between 40 to 60 rwhp. On a"mustang dyno" it will be between 30 and 50rwhp.

If your over 280 at the rear it was money well spent!!!

 

Stangt00

New Member

Oct 6, 2003

50

0

0

Apr 20, 2004

#9

• Apr 20, 2004

• #9

00gtconv said:

Hold on, dont get upset when you put it on the dyno.

You should expect to gain between 40 to 60 rwhp. On a"mustang dyno" it will be between 30 and 50rwhp.

If your over 280 at the rear it was money well spent!!!

Click to expand...

Stock setup with 75mm throttle body, 80mm mass air, intake spacer, underdrives, O/R prochamber, flowmasters welded in, and a tuned chip, I was pushing 254/292.

Almost all similar setups I have gotten replies to on other boards are all up in the 315's. Kauffmans, who hates to speculate, said all similar setups he has done so far have all broken 300. Hell, I am almost at 280 now with non PI SHM cams and OVER ported heads with the swirl dams removed (long story).

I am going through the heads and cams again to fix what was messed up the first time around, with the addition of the bullit intake this time. I just want it to run like it sounds, not like the ricers who make alot of noise but dont go anywhere,