Power steering and AC removed what size belt now?

1986LX2002

Founding Member

Aug 15, 2002

317

0

0

Oct 9, 2005

#1

• Oct 9, 2005

• #1

Took the power steering and ac off the car but I just need to know what size belt I need to run now. I still need to keep the air pump because of emissions "I havent gone through this year yet" Usually i'd just measure out with some string and come up with a size for a belt but I thought i'd post first and see what I come up with.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,260

17,945

224

Massachusetts

Oct 9, 2005

#2

• Oct 9, 2005

• #2

You can bypass the air pump for now. It isn't as vital to emmissions as you would think. I passed once without having it hooked up.

Unfortunately, you are gonna have to try the string trick to measure it out.

Also, you need to reverse the tensioner to pull up. There really is no way to run the belt with the tensioner pushing down.

Do a reason on "reversing tensioner"

 

Killer50stang

New Member

May 11, 2004

632

0

0

Oct 9, 2005

#3

• Oct 9, 2005

• #3

The best thing to do is take a measuring tape and run it around the pullies as if it's the belt. You should come up with the right size this way. I'd prefer to buy at least two, just to play it safe...good luck!

 

1986LX2002

Founding Member

Aug 15, 2002

317

0

0

Oct 9, 2005

#4

• Oct 9, 2005

• #4

Yeah I wish I could leave the smog pump off, but I live in AZ and out here they do a visual inspection and make sure everything is hooked up which really sucks. I was looking at march's elimanator bracket look's like that might be the way to go if I cant fine the right size belt after I measure it out.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,260

17,945

224

Massachusetts

Oct 9, 2005

#5

• Oct 9, 2005

• #5

You don't have to take it off. Just bypass it

Then when it's inspection time, run a longer belt so you run the smog pump

 

D

Duro5341

Member

Sep 24, 2005

86

1

7

Oct 9, 2005

#6

• Oct 9, 2005

• #6

What is this smog pump supposed to do?

This is the pulley located at the bottom, on the right side of the motor right?

I was thinking about bypassing this aswell

Duro

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Oct 9, 2005

#7

• Oct 9, 2005

• #7

Basically, it just pumps fresh air in to the exhaust to oxygenate it, thereby supposedly reducing emissions.

You can bypass the pulley, but if you ever plan on using the smog pump again (i.e. at inspection time,) pray that your pump didn't seize up from sitting that long without running.