• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Predator Tuner Question

  • Thread starter Thread starter Mach428
  • Start date Start date Mar 8, 2006

Mach428

New Member
Dec 7, 2003
321
0
0
Mar 8, 2006
#1
  • Mar 8, 2006
  • #1
I've reserched the threads and I haven't seen an answer to a question I have. Is there a computer program out there or any possible way to view your cars A/F Ratio through the predator/labtop in order to properly tune the air fuel ratio. Also, what do you all think of your predator tuners? I was thinking of buying the tuner and a C&L Inlet pipe and 85mm MAF for my Mach 1, any complaints any good feedback??
 
S

SigmaPride

New Member
Mar 31, 2005
170
0
0
Mar 8, 2006
#2
  • Mar 8, 2006
  • #2
You cannot accurately guage your air/fuel with the predator alone. You can add or remove fuel at wide open throttle, but you don't really know what your baseline A/F is so it is guesswork. You can get a wideband O2 sensor, which I think runs about $400 and then you can tell what it is.

Leave your MAF alone...unless you are pushing 400 rwhp.
 

Crzyhrse

Active Member
Dec 23, 2004
0
2
38
Seattle, WA
Mar 8, 2006
#3
  • Mar 8, 2006
  • #3
I gained 13HP and 12TQ when I went and got my Mach dynoed and got the Predator tune dialed in to the best setting for my Mach. That was worth the $350 cost of the tuner alone. And the other things it can do is just a nice bonus. If you don't have a tuner yet, you should get the SCT Excalibrator 2. It's the newest tuner out. I think they run about $400.
 

propellerhead

New Member
Apr 13, 2004
1,541
0
0
"but what's with the but shots?"
Mar 8, 2006
#4
  • Mar 8, 2006
  • #4
Option 1: Get a wideband O2 sensor with a display gauge. Read your a/f. Dial it in with the Predator.

Option 2: Get a dyno run with a/f readings. Dial it in with the Predator.

The Xcal2 allows you to connect a wideband O2 sensor to it. It'll save you the cost of the display gauge, compared to Option 1 above.

As far as basic functionality, they're about the same. You're probably better off with an Xcal2. It sounds like you might get deeper into tuning. The Xcal2 has a better upgrade path.
 

reddrgn01gt

New Member
Jun 8, 2005
161
0
0
Pittsburgh, PA
Mar 8, 2006
#5
  • Mar 8, 2006
  • #5
Crzyhrse said:
I gained 13HP and 12TQ when I went and got my Mach dynoed and got the Predator tune dialed in to the best setting for my Mach. That was worth the $350 cost of the tuner alone. And the other things it can do is just a nice bonus. If you don't have a tuner yet, you should get the SCT Excalibrator 2. It's the newest tuner out. I think they run about $400.
Click to expand...

+1

Also as stated in a previous post you need a wideband o2 sensor to check your a/f ratio accurately.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Mar 8, 2006
#6
  • Mar 8, 2006
  • #6
propellerhead said:
Option 1: Get a wideband O2 sensor with a display gauge. Read your a/f. Dial it in with the Predator.

Option 2: Get a dyno run with a/f readings. Dial it in with the Predator.

The Xcal2 allows you to connect a wideband O2 sensor to it. It'll save you the cost of the display gauge, compared to Option 1 above.

As far as basic functionality, they're about the same. You're probably better off with an Xcal2. It sounds like you might get deeper into tuning. The Xcal2 has a better upgrade path.
Click to expand...


I agree with this.

the xcal2 has the option of the pro racer package later on. this is a program that allows the end user ( you) 100 percent ability to change your tune.

the pro racer package with a wideband and you fully tune your car.
 
You must log in or register to reply here.

Similar threads

6
Transporting a car question
  • '69Stang
  • Feb 12, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
8
Views
352
1965 - 1973 Classic Mustangs -General/Talk- Feb 17, 2025
Jarhead67
J
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
948
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
759
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
526
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?