Problem: OIL Dipstick pops out... rpm's rise when cluch is in

1) Whenever I go into high rpm's in 3rd or 4th gear while racing, the dipstick pops out and a little bit of oil comes out. This happened a few weeks back racing my friend, so I was told to get a new PCV valve and give that a shot. Replaced the old PCV valve with the new one, tried it out tonight, didn't see any steam from oil hitting headers but I pulled over later because I thought I smelled a something and sure enough, dipstick was sticking out a few inches. Anyone know what else besides the PCV valve could cause the dipstick to pop out. I know I must have a lot of crankcase pressure building up.. any ideas?

2) Whenever my clutch is engaged, the rpm's rise 300 - 400 rpm's and stay there for a few. I havent checked to see if they go back down, but I do know they stay up there for a few seconds. I noticed it tonight while I was driving somewhere. Any ideas why it is doing this?

3) How bad is it to race with the performer rpm on stock heads/cam? I know its made for cars with more power but I have it on mine till I can get the 5.0 upper on. It seems like all these problems started happening once this 70mm tb and performer rpm went in...

Thanks guys.

nvm bout #2, i know the hanging idle is notorious on the 95's, but after looking there is not much I can do, so hopefully it goes away when I get the stock 60mm back on

ttt

VibrantRedGT said:

Since it's my stuff and I've run both intakes I can honestly say it's hurting you. Revving that motor to high hell is not in the cards for stock valve srpings, rockers, hyper pistons and such. Hopefully a breather will help but from dipstick experience I can also say it can be fatal. When I roasted the rings on #8 the dipstick was out, oil everywhere and steam pouring out. Hopefully yours is a simple fix. Its not the intakes fault it's you racing everything on the Earth Like I told you before, your racing with the wrong parts. Get the Performer fixed.

Click to expand...

i hear u man, its an addiction, im gonna get the performer welded this week and hopefully this guy will mail the prochamber already, he just got back from vacation