Progress report,,w/PICS!!!

[Wade95]

Let me go throw the TB and spacer on to see if the other breather is going to be an issue. If it is,,bye bye valve covers.

 

[LS-what?]

Let me go throw the TB and spacer on to see if the other breather is going to be an issue. If it is,,bye bye valve covers.

LOL

 

[Rick 91GT]

You can use a solid bottom grommet to plug the hole on the passenger cover, it works just fine and Mr.Gasket sells them. I havee actually started milling the Holley intake a little on the underside to gain clearance if needed.

I just put a set of the Ford Racing chrome valve covers over a 1.7 Scorpion rocker on a AFR185 and fit a Holley without any clearance issues.

 

[z2o_what]

Fill hole will be located under the TB when she's all buttoned up. They are not the traditional covers you see on EFI mustangs....but they do look gooooood.

dizzy hole

 

[90]

I'm kind of nervous now, i have the same in-take and i wanted those same v/cs.. my intake is not black, but instead of chroming everything out.. i was going to blacken everything i could. do they make a smaller V/C that color?

 

[302RollinHard]

you could always do something crazy like fill the oil from the drivers side VC where the other grommet hole is.

 

[302RollinHard]

by the way where did ya get that holley kit? Wink wink nudge nudge ( I know where you got it.) Lookin sick dude, keep the pics coming.

 

[bobbys9350]

where did you get that spacer from? i have a set of those same valve covers but in chrome and black. i would love to put them on my car lol. the project looks great man keep it up!

 

[Wade95]

I practically stole the kit from some guy in OH! Haaaaaaaaa.

The passenger side valve cover is wide open for filling oil, no worries there. Im just bummed that I couldn't get away with just the one inch spacer. Just hope she runs good.