Pvc Plug For Cobra Intake

kchaser · Aug 21, 2015

Doing away with the Pcv system on the wife's SC 93 fox. Going to weld in -12 fittings in the valve covers and run braided lines to breather tank. When I pulled off the intake today (had oil leak I wanted to doc) noticed another Pcv that I didn't know about in the middle back of the lower intake. Not sure the best way to plug this one. Any ideas? Can't edit title. Not putting a pvc plug in. Looking for to plug the pcv. Lol.

Sent from my iPhone using Tapatalk

Mustang5L5 · Aug 22, 2015

The valve covers shouldn't have PCV valves on a fuel injected car. Stock are blanked off. That location at the rear of the intake is the only PCV valve.

SHort of a custom plug, best way would be stick a PCV in and then plug the vacuum line. Other than that, they sell rubber plugs that you can try to match up and block that port off. Unfortunately, due to the size, it won't be "clean" so to speak.

Pvc Plug For Cobra Intake

kchaser

Member

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

Pvc Plug For Cobra Intake

kchaser

Member

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency