Question Regarding 2010 Exterior

Jopo

New Member
May 31, 2016
2
0
0
27
I own a 2010 V6 and I'm looking to change the exterior up a little bit. Currently browsing americanmuscle and there are some parts they do not have for the V6, but they do for the 2010 GT. Parts like certain hoods, headlight accessories (splitter), spoilers, etc. My question is, being a new Mustang owner (since December 2015) with little to no information on mustangs in general, will these parts for the 2010 GT fit on my 2010 V6? I'm almost 100% positive the two models are not very different if any at all.

Thanks in advance!
 
  • Sponsors(?)


Svtpilot

Founding Member
Jun 16, 2002
941
59
59
54
Long Island, NY
2010 to 2012 V6 and GT factory hoods are the same and aftermarket hoods should either car, the exception is the GT500. GT500 hoods will not fit V6s and GTs and vice versa. I took a look at AmericanMuscle, every hood they sell, says "(10-12 GT, V6)." Maybe you misread.Things like headlight splitters should be the same as well.
 
Thread starter Similar threads Forum Replies Date
B Engine Questions regarding a 93 Cobra Vacuum Leak/Intake Manifold Fox 5.0 Mustang Tech 6
Mu-TangClan Drivetrain Question regarding drive shaft flange Fox 5.0 Mustang Tech 0
I Sorry for reposting this question regarding rear ends, but I have gone cross eyed with information! 2.3L (N/A & Turbo) Tech 2
1970machwon Question regarding keys/ignition 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
C Question regarding OBD1 scanner Fox 5.0 Mustang Tech 7
M Question Regarding Tranny Cooler And Radiator/line Fittings With O-rings SN95 4.6L Mustang Tech 0
G Question Regarding 66 Fastback 1965 - 1973 Classic Mustangs -General/Talk- 4
DukeEntDotCom Need Some Assistance / Question Regarding New Heads And Rockers Fox 5.0 Mustang Tech 14
Jeremy Batchelor Question Regarding Paint Oxidation Restore. 1965 - 1973 Classic Mustangs -General/Talk- 1
S Question Regarding Boss427 X Head Motor 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 20
M 2 Questions Regarding The 2013 Mustang V6 2010 - 2014 Specific Tech 0
M Question Regarding Eom Add-ons 2010 - 2014 Specific Tech 0
bdep73 Question Regarding Ford Remanufactured 5.0 Crate Engines 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
NIKwoaC Crazy ass question regarding stick-on side belt molding. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 19
I Question regarding PBR caliper upgrade on 5-conversion Fox 5.0 Mustang Tech 12
pissedoff92 Question regarding serp belt size. Fox 5.0 Mustang Tech 10
slayerripkdc Auto detailing thread. Any questions regarding paint care/correction and interior upkeep? Ask away 1996 - 2004 SN95 Mustang -General/Talk- 45
N question regarding steering 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
A Question regarding running different size tires front and rear 2005 - 2014 S-197 Mustang -General/Talk- 9
D dumb question regarding flowmasters and headers 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
mtmc Questions regarding AODE B&M Hammer Shifter Installation SN95 4.6L Mustang Tech 3
Nightfire Quick question regarding emissions 1996 - 2004 SN95 Mustang -General/Talk- 2
Venom351R Few Questions Regarding Wheel Spacers and Front Drag Wheels 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
Nightfire Quick question regarding tires 1996 - 2004 SN95 Mustang -General/Talk- 12
Chowder Head Quick questions regarding the power steering lines 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
G Quick question regarding coil springs 1996 - 2004 SN95 Mustang -General/Talk- 1
crimsonclint New question regarding oil slinger Classic Mustang Specific Tech 3
P Question regarding Eastwood Products and Body Prep Classic Mustang Specific Tech 7
Chowder Head Questions regarding my AC and the low pressure switch 1994 - 1995 Specific Tech 6
J Important question regarding 1997 Ford mustang 8.8 rear 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
monte87 Quick question regarding 24lbers & FP??? Fox 5.0 Mustang Tech 8
R Part Question Regarding Rocker Panels Classic Mustang Specific Tech 4
199 Question regarding Horsepower GROSS vs NET, 1966 VS 2005 1965 - 1973 Classic Mustangs -General/Talk- 3
DMAN302 Barely tech...question regarding foglights on GT/CS 2005 - 2009 Specific Tech 1
ZINC76 Question regarding catted "X" pipes? SN95 4.6L Mustang Tech 3
nmcgrawj Question regarding J4J1 computer 1994 - 1995 Specific Tech 17
D questions regarding my engine Fox 5.0 Mustang Tech 1
DMAN302 Question regarding 'true duals' Fox 5.0 Mustang Tech 3
S A question regarding the mass air swap Fox 5.0 Mustang Tech 3
Anlushac11 Quick question regarding V8 brake upgrade 2.3L (N/A & Turbo) Tech 2
DMAN302 Question regarding C&L inlet pipe and Pro-M meter Fox 5.0 Mustang Tech 6
DMAN302 Question regarding MAC catted H pipe. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
P t5 install (more questions) regarding install (pt 2) Classic Mustang Specific Tech 6
P t5 install (more questions) regarding install Classic Mustang Specific Tech 9
87ttopstang Cam question regarding a possible blower install Fox 5.0 Mustang Tech 4
BlueOvalStangGT Quick question about SpeedWorx.com and Saleen regarding S281 spoiler.... 1994 - 1995 Specific Tech 13
Anlushac11 Some questions regarding my 91 LX convertible 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1
argumosa3 question regarding FR500 wheels Mustang Sound & Shine All 4
nopho85024 Question regarding smoke after recent header install Classic Mustang Specific Tech 5
9 Question regarding power source SN95 4.6L Mustang Tech 3
Similar threads