rear brakes

slapfox

New Member
Mar 6, 2008
1
0
0
newhampshire
i just redid my rear brakes in my 86 mustang i did cylinders springs shoes and new e brake cables, i adjusted the E brake cable as tight as i could but when i pull the e brake the brake shoes aren't spreading apart to catch the drums, i have adjusted the nut on the actual lever as tight as it could go and the E brake still isnt working. any suggestions on what to do?
 
Do you find any leak? It happens to my Acura CL, to bad I have to buy spare parts even the the Acura CL alternator (that is no use for the repair). I don't know if this works fine but here it is: try to adjust brakes till they lock on, then back off until wheel just spins free. If it isn't an adjustment then take dum off again and look for cracked spider or anything else cracked or broken. Try getting someone else to operate brakes and look at the rubber line for bulges forming when brake is operated. All else fails take off other side and look to check you have put it back together right and not left anything out (happens to us all).
Good luck.