• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

RED/GREEN Vacuum line broke, Need replacement link

  • Thread starter Thread starter addytheapache
  • Start date Start date Nov 18, 2019
  • Tags Tags
    1996-2004 2002mustanggt
A

addytheapache

New Member
Nov 18, 2019
2
0
1
Arizona
Nov 18, 2019
#1
  • Nov 18, 2019
  • #1
I have been working on my 2002 Mustang GT for the last 2 months, And while connecting everything It seems i have broken the Red/Green Vacuum line connected to the throttle body and egr valve. I have been searching for days and cannot find a link or anything to a replacement part. If anyone could help me find this part it would be greatly appreciated. Keep in mind I have a aftermarket BBK 78mm Throttle Body but im unsure if that effects the line since its a direct bolt on. Anyway, Please help me out!
 

stormsedge

5 Year Member
Jun 17, 2018
439
195
63
Here
Nov 18, 2019
#2
  • Nov 18, 2019
  • #2
If you have enough length/stub to either side, splice them with a piece of tight fitting vacuum hose. If they are broken right up against the rubber push on boot, pull the too short stubs from the boot(s) and reassemble. I've also seen comments some have repaired with heat shrink tubing, but I cannot vouch for the long term results.
 

tsemmett

Active Member
Jul 2, 2019
276
33
38
US
Nov 18, 2019
#3
  • Nov 18, 2019
  • #3
I don't think I've ever seen those hard vacuum lines for sale; they're likely a dealer level item. If places like RockAuto don't have it, you might replace them with generic vacuum hose, which any parts store should sell (usually by the foot).
 
A

addytheapache

New Member
Nov 18, 2019
2
0
1
Arizona
Nov 19, 2019
#4
  • Nov 19, 2019
  • #4
stormsedge said:
If you have enough length/stub to either side, splice them with a piece of tight fitting vacuum hose. If they are broken right up against the rubber push on boot, pull the too short stubs from the boot(s) and reassemble. I've also seen comments some have repaired with heat shrink tubing, but I cannot vouch for the long term results.
Click to expand...
Thanks Ill try that
 
You must log in or register to reply here.

Similar threads

D
Please help with vacuum lines
  • Dawgs000082
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
112
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
Dawgs000082
D
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
496
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
727
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
A
Vacuum line help
  • Artyom
  • Aug 27, 2024
  • 1994 - 1995 Specific Tech
  • 2 3
Replies
40
Views
3K
1994 - 1995 Specific Tech Sep 26, 2024
Artyom
A
S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
887
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?