Removing air pump, need info

[RYC CUKR]

Ok,

I got the air pump off and the pipe down to the H pipe off. The pipe that runs along the back of the engine and connects the heads to the air pump is held on with a bolt on each sided. So I took it off and I need to know if the holes in the back of the cylinder heads for the air in let are threaded and if so what size plug do I need.

Thanks

 

[89MustangGX]

You can actually go right to the Ford dealer and get the plugs (I don't know the size off the top of my head).

 

[lxsteed]

Would the plugs be the same size for stock 94/95 Cobra heads?

 

[89MustangGX]

Would the plugs be the same size for stock 94/95 Cobra heads?

Yes...any 5.0 head setup for emissions should have these same holes.

 

[MustangPunk302]

3/8" threaded plug will work , or do what Adam said..

 

[RYC CUKR]

Thanks for the help guys.

 

[IndyBlk5.0]

i just sawed off the pipe, and flipped around the holder where it goes into the head, rtv'ed it, bolted it on, whalahh

 

[93VertLX]

I did a nice job of rigging mine up, where the tube comes out of the back of the heads I just put the cap to an oil bottle on it! Hey it gets the job done!