Removing air pump, need info

RYC CUKR

Founding Member

May 19, 2002

1,437

1

38

Orlando

Jan 2, 2004

#1

• Jan 2, 2004

• #1

Ok,

I got the air pump off and the pipe down to the H pipe off. The pipe that runs along the back of the engine and connects the heads to the air pump is held on with a bolt on each sided. So I took it off and I need to know if the holes in the back of the cylinder heads for the air in let are threaded and if so what size plug do I need.

Thanks

 

89MustangGX

I have nothing productive to add!

Jul 3, 2001

10,262

1

0

Mill Creek, WA

Jan 2, 2004

#2

• Jan 2, 2004

• #2

You can actually go right to the Ford dealer and get the plugs (I don't know the size off the top of my head).

 

lxsteed

Founding Member

Aug 12, 2002

1,009

0

36

Melbourne

Jan 2, 2004

#3

• Jan 2, 2004

• #3

Would the plugs be the same size for stock 94/95 Cobra heads?

 

89MustangGX

I have nothing productive to add!

Jul 3, 2001

10,262

1

0

Mill Creek, WA

Jan 2, 2004

#4

• Jan 2, 2004

• #4

lxsteed said:

Would the plugs be the same size for stock 94/95 Cobra heads?

Click to expand...

Yes...any 5.0 head setup for emissions should have these same holes.

 

MustangPunk302

Founding Member

Sep 11, 2002

1,051

0

36

West Michigan

Jan 2, 2004

#5

• Jan 2, 2004

• #5

3/8" threaded plug will work , or do what Adam said..

 

RYC CUKR

Founding Member

May 19, 2002

1,437

1

38

Orlando

Jan 2, 2004

#6

• Jan 2, 2004

• #6

Thanks for the help guys.

 

IndyBlk5.0

New Member

Nov 24, 2003

1,122

1

0

New Whiteland, IN

Jan 2, 2004

#7

• Jan 2, 2004

• #7

i just sawed off the pipe, and flipped around the holder where it goes into the head, rtv'ed it, bolted it on, whalahh

 

93VertLX

Founding Member

Apr 7, 2002

667

1

0

Dayton, OH

Jan 2, 2004

#8

• Jan 2, 2004

• #8

I did a nice job of rigging mine up, where the tube comes out of the back of the heads I just put the cap to an oil bottle on it! Hey it gets the job done!