I wanted to remove the running horse emblem from my front grill. I'm going to replace it with the black one, w/flames. Do I need to break the two pins holding it on? The new one has sticky tape only. I was going to reuse, or create new pins to stick it back on with. Thanks.
That's one way to do it but if you look close,there's little push on washers that are actually holding the pins through their alignment holes. You should be able to carefully pull those washers off,then the pony will seperate from the black plastic backing.
That's one way to do it but if you look close,there's little push on washers that are actually holding the pins through their alignment holes. You should be able to carefully pull those washers off,then the pony will seperate from the black plastic backing.
Here's what I did. Remove the grill and use a grinder to grind those "spikes" from the pony that go thru the black plastic. Then you should just be able to stick the new pony right on.