Requesting pics of SN95 rear end w/tires on Fox

citmov

10 Year Member

Sep 25, 2009

632

12

49

Chi-town

May 24, 2011

#1

• May 24, 2011

• #1

Does anyone have a complete SN95 rear end that they put in a Fox to convert to 5 lug? I know the SN95's are a tiny bit wider and I just want to make sure it looks okay before I make the swap.

If you have any pics please post for me. Also, let me know what size tire you're running.

My plan is to run 255/40/17's in the front and rear. Any pics or advice would be appreciated. Thanks!

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,264

17,952

224

Massachusetts

May 25, 2011

#2

• May 25, 2011

• #2

It would be the same as just sticking sn95 brakes and axles in a fox rear...which many here have.

Here's mine with 17x8 sn95 wheels and 245/45/17. A 255 might clear, but rolled fenders and not being too lowered would be a must.

235/45/17 in front...Mach 1 springs all around

 

281pony

Active Member

Aug 31, 2003

2,681

2

46

Oly, WA

May 25, 2011

#3

• May 25, 2011

• #3

if you want to run a 9" rear rim, you need 05 mustang spec wheels.

i ran this for awhile with 275's on the back. real tight on the fender lips, but it worked.

View attachment 188112

 

citmov

10 Year Member

Sep 25, 2009

632

12

49

Chi-town

May 26, 2011

#4

• May 26, 2011

• #4

Thank you thank you! Really appreciate the pics!

I'm planning on rolling the fenders and I was planning on lowering the car (1" rear and 1.5" fronts). Hopefully I'll be good to go here.

Mike:
With the Mach I springs, how much did it lower your front and rear?

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,264

17,952

224

Massachusetts

May 26, 2011

#5

• May 26, 2011

• #5

citmov said:

I'll be good to go here.

Mike:
With the Mach I springs, how much did it lower your front and rear?

Click to expand...

Hard to say really. I had Ford racing C springs on the car, so when i put the Mach 1 springs on, i lifted the car up.

based on comparisons with fender height measurements...only about 1/2 or so

 

citmov

10 Year Member

Sep 25, 2009

632

12

49

Chi-town

May 26, 2011

#6

• May 26, 2011

• #6

Thank you sir!

 

Kdubslugga

Active Member

Jun 7, 2003

1,515

3

38

43

Akron, OH

May 26, 2011

#7

• May 26, 2011

• #7

18x9 Shelby Razors, 285/35/18 Michelin Pilots, Sn95 Moser Axles

 

Adams91LX

Active Member

Dec 9, 2003

689

12

29

Plano, TX

May 26, 2011

#8

• May 26, 2011

• #8

sn95 axles, 88 tc rear end... 05+ offset 17x9 bullitts, 275 width... not any great pics from the back... but you get the idea.

 

B

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe

Jul 13, 2003

2,433

23

48

Canada

May 27, 2011

#9

• May 27, 2011

• #9

View attachment 187994

View attachment 187995

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,264

17,952

224

Massachusetts

May 27, 2011

#10

• May 27, 2011

• #10

Nice stance

 

citmov

10 Year Member

Sep 25, 2009

632

12

49

Chi-town

May 27, 2011

#11

• May 27, 2011

• #11

Man, you guys are really, really great! Thank u thank u!

I'll post pics once I'm done with mine.

 

R

Rookie71

Member

Jul 25, 2006

28

7

19

May 28, 2011

#12

• May 28, 2011

• #12

15x8 Weld Prostars with M/T 275/60x15 tires.

 

citmov

10 Year Member

Sep 25, 2009

632

12

49

Chi-town

May 28, 2011

#13

• May 28, 2011

• #13

Everyone's cars look great!

Did anyone of you guy lower your car? If so, by how much exactly (front & back) and what type of springs?

 

281pony

Active Member

Aug 31, 2003

2,681

2

46

Oly, WA

May 28, 2011

#14

• May 28, 2011

• #14

citmov said:

Everyone's cars look great!

Did anyone of you guy lower your car? If so, by how much exactly (front & back) and what type of springs?

Click to expand...

mine is slammed front/rear on coilovers fr, torque arm springs/weightjacker lca's rear.