Requesting your help - 302 build suggestions please...

Ok, I'm swapping a 302 into my 97 Ranger Splash, and I'd like some suggestions on how to build this motor.

Here's what I've collected already.

79 302 block.
Ported E7's.
Edelbrock Performer 289 Intake.
I know I'll be going with a set of Headmann swap headers as well.http://store.summitracing.com/default.asp?target=search.asp&type=bymanufacturerspart&searchtype=both

I'll be running an AOD with a shift kit, and probably stock torque converter to start.

Funds are quite limited, so I'll be piecing this together as my wallet allows.

I'm looking for a motor with good low end torque, as it is going to be a weekend cruiser only, not raced, not daily driven. It needs to be streetable and friendly to drive (somewhat), as I'd like my wife to drive it as well. Don't get me wrong, I will get on it, but I don't want to have to rev to 4000 to start making power.
I will send it out for machine work, and will do a full rebuild (0.030 over and pistons etc...)

What suggestions have you got (specifically on the cam)?

Thanks very much!

Kevin

Thanks for the reply!

What kind of power is that going to give me? Can I reasonably expect 250-260 HP using that cam? I guess that is about what my goal is...nothing wild, but more than a stock stang.

Isn't the b303 a roller cam though? I've got a 79 block and I'm not interested in spending uber cash on cranes conversion lifters...

What about the FRPP M-6250-A311 Cam?

(thanks for your input guys Keep it coming!)

Ok. Check these numbers and let me know what you think.

M6250-A311 cam

Duration @ .050 204 intake 214 exhaust
Gross lift .448 intake .472 exhaust
LSA 107 intake 117 exhaust

Sound any good for what I want? (low end torque with HP that doesn't fade real quick)

Thanks for your help thus far!

Kevin