• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rev limiter question

  • Thread starter Thread starter hi_po_heads
  • Start date Start date Jun 4, 2006
H

hi_po_heads

New Member
Jan 13, 2003
117
0
0
paragould arkansas
Jun 4, 2006
#1
  • Jun 4, 2006
  • #1
i have an 88 coupe with a9p computer. I took it to get tuned and had an sct tune put on. The company said they took the rev limiter out but it still hits rev limiter around 6200 rpm. called a few different places now and they say rev limiter cant be taken out unless you use a stand alone box. what should i do.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jun 4, 2006
#2
  • Jun 4, 2006
  • #2
Whomever told you that it can't be removed without a stand alone, did not know what they were talking about. Take it back to the tuner and have them move it out of the way vs. turning it off. Just have it set to say... 8000 rpm or whatever your cam and heads poop out at.

The reason I know it can be disabled is that I was messing around with that function today on the TwEECer. There are "rev limiter on" and "rev limiter off" scalers in the EEC-IV. How those scalers are set determines the limits and whether they are active or inactive.
 
9

90lxboost'n

Member
Jan 1, 2006
55
0
6
Ohio
Jun 4, 2006
#3
  • Jun 4, 2006
  • #3
What's up guys. I am new to stangs, what is a tweecer and its purpose Thanks Ricky..
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jun 4, 2006
#4
  • Jun 4, 2006
  • #4
http://eectuning.org/forums/index.php
 

petr1

New Member
Oct 7, 2005
13
0
2
Aug 1, 2006
#5
  • Aug 1, 2006
  • #5
I was in track with my 91 gt otherday and when I was gona shift from 3rd to 4th I stupidass put 2nd in .
I had ~4500-5000rpm in 3rd.
Engine had over revs for seconds .
Awerything else seems to work fine but it seems that rev limiter is dead.

Where it is located. Somewhere in trans/flywheel. Has it something else porpouse than limit the rews. I dont find any info anywhere on what kind of system it is. How do you think it's broken. Could it be only something elctrical.

Do I need it anything else than keeping revs in oder. Normaly I shift max 5000rpm.

amnit:
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Aug 1, 2006
#6
  • Aug 1, 2006
  • #6
The rev limiter is within the computer. It will not stop the motor from overreving when you miss 4th and slam it into 2nd.

The rev limiter cuts fuel to fuel injectors so that you can't rev it to the moon under power. There's also an ignition rev limiter but there's some debate as to whether or not this function actually works in the Fox family of computers.
 

petr1

New Member
Oct 7, 2005
13
0
2
Aug 1, 2006
#7
  • Aug 1, 2006
  • #7
I know that it can't limit revs if driver puts too low gear in.

So there is nothing mecanical about it.

It's been working arlier during some burnouts. Could ECU reset help. Batery line open.

how bad in general high revs for seconds is for engine. It's all stock. valve float isn't good thing off course.


I hope that nothing else is goming up.
 

petr1

New Member
Oct 7, 2005
13
0
2
Aug 3, 2006
#8
  • Aug 3, 2006
  • #8
how bad in general high revs for seconds is for engine or drive train. I had mayby 6500-7000 rpm. Or mayby worscase 7500 rpm.

There is'nt any strange noiseses. Only rear end "klont" doring shift like normal.

I checked side movement of the tailshaft and there is abaut 1mm of it. I don't mean circulate movement but "left right" movement by hand . Is that normall amount?
 
You must log in or register to reply here.

Similar threads

O
injectors keeping up?
  • optionizerSS
  • Apr 4, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
4
Views
398
2005 - 2014 S-197 Mustang -General/Talk- Apr 4, 2025
optionizerSS
O
P
Progress Thread New To Me 1988 GT - trying to set up vacuum lines for upper intake question
  • pindude80
  • May 6, 2025
  • Fox 5.0 Mustang Tech
  • 9 10 11
Replies
214
Views
16K
Fox 5.0 Mustang Tech Mar 28, 2026
pindude80
P
X
Free VE Table Corrections — Drop Your MSQ and a Datalog, I'll Do the Rest
  • X-cam34
  • Apr 12, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
2K
Digital Self-tuning Forum Aug 26, 2026
X-cam34
X
P
Electrical MSD box wiring for an 88 GT- few questions.
  • pindude80
  • Jul 20, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
1K
Fox 5.0 Mustang Tech Jul 25, 2024
pindude80
P
J
'96 Cobra: A/C gets weak and engine misfires under load when warm
  • jruhnke
  • Oct 22, 2025
  • SVT Tech Forum
Replies
2
Views
480
SVT Tech Forum Nov 20, 2025
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?