Have an 89 GT with minor add ons, bbk cold air, msd blaster coil, msd cap and rotor, msd 8.5 wires, no smog pump 3:55's, what should my rpm idle be at, i have it at 900 right now, anyone have a better idea on what it should be on? Thanks in advance
Stock is 625-675 RPM IIRC. Anywhere between there and 900 RPM is probably fine - it kinda depends upon each individual car. Most guys start messing with the idle setting to accomdate cams.
Thanks for the welcome and i am gonna lower it to about 750-800 and see how it drives and reacts, has anyone run an msd 6a or 6al box on a stock 5.0? If so what are the good and bad things about it?
Nothing wrong with the MSD box, i just heard u cant run stock non spiral core wires or something. But anytime you mess with the idle you need to reset ur tps
Thanks for the tps headsup, i do have the spiral wound wires from msd, i was just wondering if the 6a box was worth the money, as far as an added mod to my stock stang?
First, I would clean out the IAC solonoid and throttle body. Then disconnect the AIC and set the idle using the throttle stop set screw, then, shut it off, reconnect the IAC and restart the motor, this should help. Sometimes, removing the batter cable and resetting the computer helps after the throttle has been set. This is called the Ford Idle Reset Procedure. If this fails, then resort to replacing the solonoid.