rpm2 on afr PROBLEMS!

watchdogfour

New Member
Nov 11, 2008
49
0
0
bgky
hey guys i am new to the forum and the reason i joined is i am putting together a 347 and my problem is i have afr 185's 72cc that where milled to make them 68cc by afr around 18 thousands i think.my intake is edelbrock rpm2 and on the end where the cork gaskets go there is way to mutch space left over the gaskets wont work.i was woundering if any of you guys have ever ran in to this problem before i could realy use some help here thank you very mutch guys for any info
 
thanks

thanks the 1/4 in. bead of silcone worked if i would have read the instructions on the intake it said to do that but who the hell ever reads the damn instructions.got the motor in today!!! cant wait to start that bad boy tomorrow.I woould post some pics but i still have to figure out how
 
PICS

ok i think i got it figured out
CIMG1235.webp

CIMG1234.webp

CIMG1233.webp

CIMG1232.webp

CIMG1231.webp

CIMG1230.webp

CIMG1229.webp

CIMG1228.webp

CIMG1222.webp

CIMG1223.webp

CIMG1224.webp

CIMG1225.webp

CIMG1226.webp

CIMG1227.webp
 

Attachments

  • CIMG1235.webp
    CIMG1235.webp
    55.4 KB · Views: 94
  • CIMG1234.webp
    CIMG1234.webp
    44.8 KB · Views: 93
  • CIMG1233.webp
    CIMG1233.webp
    28.6 KB · Views: 112
  • CIMG1232.webp
    CIMG1232.webp
    41 KB · Views: 105
  • CIMG1231.webp
    CIMG1231.webp
    37.8 KB · Views: 97
  • CIMG1230.webp
    CIMG1230.webp
    34.9 KB · Views: 95
  • CIMG1229.webp
    CIMG1229.webp
    24.7 KB · Views: 91
  • CIMG1228.webp
    CIMG1228.webp
    19.8 KB · Views: 110
  • CIMG1222.webp
    CIMG1222.webp
    31.6 KB · Views: 111
  • CIMG1223.webp
    CIMG1223.webp
    34.1 KB · Views: 89
  • CIMG1224.webp
    CIMG1224.webp
    29.8 KB · Views: 111
  • CIMG1225.webp
    CIMG1225.webp
    19.2 KB · Views: 110
  • CIMG1226.webp
    CIMG1226.webp
    26.1 KB · Views: 109
  • CIMG1227.webp
    CIMG1227.webp
    25.8 KB · Views: 103