S/S radiator hose and A/N fittings help!

The t-stat housing would have to have a -16 AN fitting welded to it. Or if someone makes a t-stat housing with the -16 male AN fitting. The water pump would need to have a -20 male AN fitting welded to the inlet. So the top of the radiator would need a -16 and the bottom of the radiator would need a -20. The water pump and lower radiator fittings need to be bigger than the outlet (t-stat) side as the water pump/lower radiator are on the suction/inlet side whereas the t-stat/upper radiator is on the pressure/discharge side.

It looks like the second picture is just fake SS hose wrapped around a stock'ish rubber hose, they sell kits like that.

I doubt SS hose would keep a shape like that.

I think the second pic is of his car, and he wants it to look like the first pic?