Scattershield for t-45

[Gwalcmai]

I have a 00 GT that is running a 100 shot of nitrous. Recently I burnt out my clutch and am about to put in a new mcleod stage 2. My concern is since i launch with the nitrous (I have the nos noszle kit which activates at wot after 2500 rpm) would it be wise while my tranny is out to install a scattershield (aka bullit proof bellhousing)? I have searched online a little and have not found anything really for the t-45 tranny. Has anyone installed one of these? Does anyone know where to find one?

Thank you for your responses in advance!

 

[RandyStinchcomb]

its not made, the bellhousing on a T-45 is part of the trans, so it cant be done. there are 2 ways around this. install a TKO trans and a Lakewood blow-proof @$2k for everything. or if you look at NHRA rules, you can make a trans shield out of 1/4" plate steel and bolt it around the trans tunnel area but thats gonna' add a bunch of weight to the car.