SCT Xcal install?

Easy

You will just plug it into the port to the left of the steering collum down below by your knee. I wont go into detail, here but when you plug it in the cars battery will power the SCT and will prompt you on what to do. I have three tunes in mine, an 87, 91, and 93 octane. Its going to save your stock set up for you first then you choose which tune you want.

I did mine at the gas pump the first time its that easy. With a proper CAI , "mine is a C&L" and the 93 tune, expect about 30 horses. The difference in performance takes too long to fully explain for me. But a night and day difference come pretty close.

ucf11784 said:

From what I understand it plugs right in under your dash without any wire cutting, splicing, or soldering correct?

Click to expand...

yes

ucf11784 said:

Also Is it easy to change programs ?

Click to expand...

very easy, just plug it in and choose new program, while following the instructions on the tuner.

ucf11784 said:

has anyone here had that problem posted in the sticky with the car not starting after getting back from the dealer?

Click to expand...

not me

ucf11784 said:

Will the Xcal 2 provide good power gains with just Borla Stingers on my GT?

Click to expand...

it will add some power, but not as much as if you added a CAI at the same time. be sure to tell your tuner you dont have a CAI, it will make a difference in your tune. the biggest plus for your combo will be added throttle response, and if you have an auto, better/firmer shifts.