SLP l/t went in today!!!

ADRENLN · Oct 21, 2005

my car is still at the tuners, so im not sure what the exact #'s are, but i will let you guys know tomarrow. from what i heard, im not too impressed.

so far he said he got 11 peak rwhp out of them. now im not sure what the gains are in other areas of the rpm range, hopefully high. not sure of the rwtq gain yet either, he is not done tuning it.

tuner is having some problems with the car running lean from 2000-3000 rpm's
he said he played with the fuel curve and some other things but said its still a bit lean. up top its fine he said hes got a ton of fuel going to it too, not sure what he means by this. he also said that if he can get the bottem richened up ill pick up some more tq.

guys any ideas what might be causing this? also what is a good a/f range, what is too lean?

csledd · Oct 21, 2005

here's my dyno graph taht you can take a peak at, of course I dont have cams but this is with the LTs, O/R X-pipe, cat-back, cai, and 75mm tb and plenum

http://www.csledd.com/ellie/dynosheet.jpg

I was very happy with my numbers.. as you can see Im kinda rich there instead of being lean, who is your tuner btw?

jasonh_86 · Oct 21, 2005

Wish my dyno graph looked like that

RedDaemon · Oct 21, 2005

csledd...if u got some VT cams.....

csledd · Oct 21, 2005

-=NightHawk=- said:
csledd...if u got some VT cams.....

lol yeah, I'm thinking about going with the VT stage 1's so I don't have to change out a lot.. I'm saving for a mongoose kit also

AD..any update on your numbers man?

DerekStangGT · Oct 21, 2005

ADRENLN said:
my car is still at the tuners, so im not sure what the exact #'s are, but i will let you guys know tomarrow. from what i heard, im not too impressed.

so far he said he got 11 peak rwhp out of them. now im not sure what the gains are in other areas of the rpm range, hopefully high. not sure of the rwtq gain yet either, he is not done tuning it.

tuner is having some problems with the car running lean from 2000-3000 rpm's
he said he played with the fuel curve and some other things but said its still a bit lean. up top its fine he said hes got a ton of fuel going to it too, not sure what he means by this. he also said that if he can get the bottem richened up ill pick up some more tq.

guys any ideas what might be causing this? also what is a good a/f range, what is too lean?

as far as A/F ratio goes, the perfect ratio is called Stochiometric (sp?) and is 14.7:1 (atmospheric pressure). however, ive always heard the ideal A/F ratio on performance cars should be ~ 13:1 i dunno why

RedDaemon · Oct 21, 2005

csledd said:
lol yeah, I'm thinking about going with the VT stage 1's so I don't have to change out a lot.. I'm saving for a mongoose kit also

AD..any update on your numbers man?

if ur goin the blower route why dont u do it right and go with the VT Stg 2's?

jasonh_86 · Oct 21, 2005

+1 for VT Stage 2

But, Stage 1 will still do quite nicely

csledd · Oct 21, 2005

I would do stage 2.. but if I do those I have to change out a lot more stuff, and I would also want new heads. Plus I have to be careful about how much power I do end up making in the end because I don't want to break anything and I'll still be on stock internals when I get the mongoose kit

ADRENLN · Oct 21, 2005

no update, i will have to wait for the car till monday. the car is still running lean in that area. they dont really know why. they mentioned the maf, but i think the stocker is good for alot more power right?

i really dont know what can cause this, im still trying to figure it out. things were fine before, but with the addition of the headers it is leaning out.

i always thought l/t made you run more rich then anything.

what do you guys think. i was told the injectors would be fine, but do you think it could have somthing to do with them?

tuner says he loads it up with fuel and it just goes back to lean???

jasonh_86 · Oct 21, 2005

csledd said:
I would do stage 2.. but if I do those I have to change out a lot more stuff, and I would also want new heads. Plus I have to be careful about how much power I do end up making in the end because I don't want to break anything and I'll still be on stock internals when I get the mongoose kit

Good point.. wouldnt wanna be crappin out a rod or anything

SLP l/t went in today!!!

ADRENLN

Active Member

csledd

Official Ovary Punching Member

jasonh_86

I

RedDaemon

csledd

Official Ovary Punching Member

DerekStangGT

My package is in the mail!

RedDaemon

jasonh_86

I

csledd

Official Ovary Punching Member

ADRENLN

Active Member

jasonh_86

I

Similar threads

SLP l/t went in today!!!

Active Member

Official Ovary Punching Member

I

Official Ovary Punching Member

My package is in the mail!

I

Official Ovary Punching Member

Active Member

I

Similar threads

Privacy & Transparency

Privacy & Transparency