sn95 brakes....

[DEFWISH]

Okay, so Im about ready to start my conversion,We bought a wrecked 95 stang with no motor or trans. so I have the front brake assemblies (spindles, hubs, rotors, calipers,) I took everything off of that car as far as brakes go, including e brake and e brake cables. I am going rear disc and im gonna try the .75 in longer axles that were in the 7.5. i ordered the fox - sn95 passenger brake line adapter and Rear brake line adapters. i have a master cyl off of a 95 as well. SO what else do i need to do. 3 -2 port conversion still?? and should i gut my stock pv and go with an adjustable prop valve. Any tips will be greatly appreciated.

 

[GSP393]

This website should help you with any questions. http://www.svo73mm.cjb.net/

 

[DEFWISH]

thx but i've been there a billion times, just after reading it all i still don't feel 100% about it. im also looking for some extra tips maybe not mentioned in that site or sn95brakes.com

 

[Ozz]

The longer axles will look great.

You will need to gut your stock prop. valve and use the adjustable one.

You will need the 3-2 port conversion.

 

[DEFWISH]

so then im set, i was thinking about http://www.autoanything.com/brakes/61A3155A0A0A1825629.aspx, would this be any good???? btw im running 17x9s and fms c springs, rubbing??

 

[Kumm3]

what 17x9s will you be running?

I had to roll my rear fenders when i went to 17x9s, i have the SN95 axles out back and C springs.

17x8s with C springs will clear.

 

[DEFWISH]

ones like these, and how do you roll your fenders?

 

[Kumm3]

ah, those are 17x8s, you wont need to roll your fenders at all.

 

[Kumm3]

what size tire?

 

[Shakerhood]

I would NOT use the Calipers from that car, do yourself a HUGE favor and at least get Aluminum PBRs from a 99-04!!!

 

[DEFWISH]

im pretty sure they are 9 in wide rims. ill double check tomorrow. not sure on tire size, but nothing lik 275. i plan on 99 + dual pistons when i get some more $$ but these should get me by right?

EDIT:: sorry to doubt you.. i think they are 8 inch... i still wanna measure mine tomorrow
i must be crazy

 

[Shakerhood]

Those wheels are 17x8

 

[PJB]

where did you get the brake line adapter for the front?
Im piecing together a 5 lug conversion and need to get that.

 

[Prime Lord]

Since you've got the 17" wheels, do yourself a favor and get the 13" Cobra setup for the fronts. You can't go wrong with 13" of brembo twin piston goodness.

 

[DEFWISH]

Since you've got the 17" wheels, do yourself a favor and get the 13" Cobra setup for the fronts. You can't go wrong with 13" of brembo twin piston goodness.

send me a cashier's check for em and i'll gladdly buy em...
I plan on going with a cobra upgrade kit or something... but i still need to buy a bizzillion of other things for other things in the car.

P.S. i bought the Front fox3-SN95 adapter, passenger side and the Rear brake line adapters, Pair from http://sn95brakes.com/store.php

 

[PJB]

Thanks. I just ordered the front adapter. Im staying with rear drums for now.

 

[Ozz]

I went with braided lines that had a flat head and everything fit up fine w/o those adapters Just one less possible leak down the road, ya know?

 

[DEFWISH]

I went with braided lines that had a flat head and everything fit up fine w/o those adapters Just one less possible leak down the road, ya know?

hhmmmm... thats cool you didn't need em

 

[Shakerhood]

hhmmmm... thats cool you didn't need em

Yep the MM Braided lines are sweet and not needing the adapter is just a plus! You might want to consider a 93 Cobra Brake Booster instead of the 95 as the Studs are in the same location and have the correct thread pitch.

 

[El_CUCUY]

I went with braided lines that had a flat head and everything fit up fine w/o those adapters Just one less possible leak down the road, ya know?

So where did you get the lines im pieceing my 5 lug stuff as well and i have the following:

94 spindles/hub
moser fox length axles
5 lug drums
99 gt calipers/rotors

not to sure what else i need and i haven't heard of this adapter they are speaking of

any info on this would be great and a list of other stuff would be good