• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

SN95 fronts and line lock?

  • Thread starter Thread starter Rick James
  • Start date Start date Jan 7, 2009
R

Rick James

Member
May 13, 2007
172
3
19
burlington new jersey
Jan 7, 2009
#1
  • Jan 7, 2009
  • #1
Hey guys,being that i am home for a few weeks due to knee surgery i figure i would like to get as much info for my brake swap,that i want to start soon.Now i purchased 95GT spindles/hubs,calipers and rotors(used).I plan on buying
from Maximum motorsports a new 95 master cylinder and and swap specific soft lines,now my question is i already have a Hurst line lock would i still need to do the 3-2 conversion?how the heck would i run the lines with the stock proportioning valve and with a 95 master cylinder.P.S. staying with drums in the rear,i havent found anybody that has gone to disc in the rear with Moser c-clip eliminaters.Thanks
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Jan 7, 2009
#2
  • Jan 7, 2009
  • #2
If your line lock has the two front lines plumbed into the output, then a single input line from the MC or the PV, then you should be fine as the 3rd port is not used. But if both ports are plumbed into the LL input, then you will just need to plumb the rear line from the MC into the LL input. Probably would be best to show us a picture or a diagram of your setup, then we can recommend a course of action.

Here are some pics of a LL install a friend did on another guy's car:



He puts a plug in the 3rd port under the MC, but if you are changing to a 95, that won't be necessary.



As for your other issue, the same guy has a solution for running rear disc that may work for you.
 
You must log in or register to reply here.

Similar threads

W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
290
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
387
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 8, 2026
bjornsn95
B
3
Brakes Front brakes sticking - 1988 5.0
  • 302Blue
  • Oct 18, 2024
  • Fox 5.0 Mustang Tech
Replies
7
Views
582
Fox 5.0 Mustang Tech Oct 19, 2024
ustacould
Brakes Need help ID’ing which brake lines and seals I need
  • AnthonyA1234
  • Apr 2, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
1K
Fox 5.0 Mustang Tech Apr 14, 2025
limp
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?