• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

So I ran my car with straight headers....

  • Thread starter Thread starter a_k
  • Start date Start date Jun 20, 2005

a_k

New Member
Nov 12, 2004
170
0
0
Saratoga NY
Jun 20, 2005
#1
  • Jun 20, 2005
  • #1
So today i'm driving around and I have a massive exhaust leak, so I take my h pipe off and check it out, tighten the down tubes, and leave the crossover off the prochamber. So i have shorty headers with just the down tubes on. Let me tell you. This thing is loud. I mean crazy. I drove it to taco bell with a few friends and it was ridiculous. It was awesome though. I think im drivning it to graduation rehearsal tommarow (high school) Then i'm going to come back and put it on. We made a few vids they didnt turn out that well but It was pretty badass.

Adam.
 

cobra dave

New Member
Sep 1, 2003
308
0
0
Jun 20, 2005
#2
  • Jun 20, 2005
  • #2
Not good dude. Your going to burn up your heads ,valves in particular. You need high compression to run open headers. You didn't hurt it making a run for the border but you dont wnat to do it again especially with shorties. Put it back on tomarrow morning.
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Jun 20, 2005
#3
  • Jun 20, 2005
  • #3
come on dave...it sounds sooooooo good
 

95WhiteVenom

Founding Member
Oct 27, 2002
624
0
16
Alabama
Jun 20, 2005
#4
  • Jun 20, 2005
  • #4
dave is right get em on and soon!
 

a_k

New Member
Nov 12, 2004
170
0
0
Saratoga NY
Jun 21, 2005
#5
  • Jun 21, 2005
  • #5
alright since i only drove 2 miles i think im fine

im going to go put them on now. thanks!
 
9

95yellowGTS

Member
Aug 31, 2004
41
0
6
Pope AFB, NC
Jun 21, 2005
#6
  • Jun 21, 2005
  • #6
the burning up valves part is an old myth. you didn't/won't hurt a thing. Hell I drove my Bronco (351M) around for a few months with open headers, it sounded so gooood no problems whatsoever.
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Jun 21, 2005
#7
  • Jun 21, 2005
  • #7
Well if I understood him right, he didn't run just open headers, didn't he have the pipes coming off them too (without the crossover)? I don't think he'll have a problem with that. Even if he did burn up some vavles, shoot, that just gives him a chance to replace his heads!
 

dstanggt50

Founding Member
Sep 13, 2000
1,316
0
0
Woodinville, WA
Jun 21, 2005
#8
  • Jun 21, 2005
  • #8
I had some friend that ran no mufflers, it was really loud, and he ran it for a couple of months like that. As far as I know, didn't have any problems.
 

a_k

New Member
Nov 12, 2004
170
0
0
Saratoga NY
Jun 21, 2005
#9
  • Jun 21, 2005
  • #9
CManT1914 said:
Well if I understood him right, he didn't run just open headers, didn't he have the pipes coming off them too (without the crossover)? I don't think he'll have a problem with that. Even if he did burn up some vavles, shoot, that just gives him a chance to replace his heads!
Click to expand...

exactly. I ahve the two pipes coming off each side bringing the exhaust under the car without the crossover. yeah haha that would be a good excuse but the only problem is i dont have $1000 right now
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Jun 21, 2005
#10
  • Jun 21, 2005
  • #10
Yeah burning the valves is BS u can run it like that. NO problem and why would high compression stop your valves from being burned if that even was a problem?
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Jun 22, 2005
#11
  • Jun 22, 2005
  • #11
WhiteDevil said:
Yeah burning the valves is BS u can run it like that. NO problem and why would high compression stop your valves from being burned if that even was a problem?
Click to expand...


This is exactly what I was just thinking........
 
You must log in or register to reply here.

Similar threads

R
bbk shorty header to mid pipe gasket
  • randyyy
  • Sep 29, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
349
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2025
randyyy
R
S
5.0 Rebuild
  • smittys7up
  • Nov 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
551
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 20, 2025
Noobz347
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
384
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?