• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Sportline springs on stock struts/shocks

  • Thread starter Thread starter Xcessiv
  • Start date Start date Dec 7, 2004
X

Xcessiv

Member
Jul 16, 2004
187
0
16
Dec 7, 2004
#1
  • Dec 7, 2004
  • #1
Hi everyone.

I know that the topic has been covered often, in fact I've read all of them. I'm still unsure about installing Sportline springs on stock struts/shocks (everything stock except springs) but I don't have the money to invest on a whole suspension setup. My '01 GT only has 14 000 miles and I wouldn't want to decrease the struts/shocks life by a 50%+ factor. Is it a myth or a reality? Will everything last 2-3 years without a single problem? On the other hand, I don't like the pro-kit drop (no enough for me) so I will simply not drop my Stang if I don't go with Sportline.

One more question, how much do typical C&C plates go for and are they necessary? Will my alignment be ok without them? I found some "almost new" Sportlines for 150$ CAD but they were previously on a convertible Stang. Are they the same as the coupe ones?

Sorry for posting so many questions, your help would be appreciated.
Regards,
Yan
 
X

XStanger

Founding Member
Sep 1, 2002
383
0
16
Dec 7, 2004
#2
  • Dec 7, 2004
  • #2
I have had sportlines for a year and I have not one issue. Shocks are fine, tire wear is fine, but I also left my isolators in so that may have something to do with it.
 

cryptic

New Member
Sep 10, 2004
131
0
0
Dec 7, 2004
#3
  • Dec 7, 2004
  • #3
Sporline Springs;

I don't know about the wear on yur stock struts/shocks, but he springs you have will not wok on your coupe. The spring rate is different for verts.
CC plates you can get from between 190-250.
 
X

Xcessiv

Member
Jul 16, 2004
187
0
16
Dec 7, 2004
#4
  • Dec 7, 2004
  • #4
cryptic said:
I don't know about the wear on yur stock struts/shocks, but he springs you have will not wok on your coupe. The spring rate is different for verts.
CC plates you can get from between 190-250.
Click to expand...
Ok I guess the spring rate for convertibles is higher, won't it just sit a bit higher? Is there any other difference beetween the two?
 

cryptic

New Member
Sep 10, 2004
131
0
0
Dec 7, 2004
#5
  • Dec 7, 2004
  • #5
Springs;

Yes the rate is higher due to the weight of the vert being more, so I guess yes it would sit a bit higher. So maybe you could still use them
 
X

Xcessiv

Member
Jul 16, 2004
187
0
16
Dec 7, 2004
#6
  • Dec 7, 2004
  • #6
So the drop should be beetween the one of typical sportlines and pro-kits? Will I need C&C plates and eventually other struts/shocks then?
 

cryptic

New Member
Sep 10, 2004
131
0
0
Dec 7, 2004
#7
  • Dec 7, 2004
  • #7
Springs

I'm not sure, I've read mixed threads, you should get cc plates for the geometry of your front end to be in allignment, but as far as the shocks/struts your stock should be fine unless you are planing for even better handling, you might want to get adjustables.
 
X

Xcessiv

Member
Jul 16, 2004
187
0
16
Dec 7, 2004
#8
  • Dec 7, 2004
  • #8
cryptic: thanks! Does anybody have more information about convertible springs on a coupe and using sportlines on stock shocks/struts?

Regards
 
X

Xcessiv

Member
Jul 16, 2004
187
0
16
Dec 7, 2004
#9
  • Dec 7, 2004
  • #9
TTT. The guy is now selling his practically new convertible Sportlines for 100$ CAD (they sell for about 400$ CAD here). The really cheap price would pay for the required C&C plates. Now I just need to know:
1) Will convertible springs still allow me to get a nice drop or if it'll be more similar to a pro-kit?
2) Did anybody else test Sportlines + C&C plates + everything else stock? Did you have any problem with this setup?
3) Will Steeda 3 bolt C/C plates do the job?

Regards
 
D

Darkhorse845

Banned
Nov 17, 2004
101
0
0
Las Vegas,Nevada
Dec 8, 2004
#10
  • Dec 8, 2004
  • #10
You should be fine.When the stock
shocks and struts start to show
signs of wear just replace them!
 
X

Xcessiv

Member
Jul 16, 2004
187
0
16
Dec 9, 2004
#11
  • Dec 9, 2004
  • #11
One more important question before making the move... Alot of people keep telling me how Sportlines on stock shocks/struts will make the ride DANGEROUS with worse handling and alot of instability suspension wise with some SERIOUS wheel hop. I know that only changing springs will modify the whole geometry and affect the stock suspension, but won't the handling be at least a bit better than before?
 

KAILUAZ

New Member
Jul 15, 2004
333
0
0
St Pete, FL via Kailua, HI
Dec 9, 2004
#12
  • Dec 9, 2004
  • #12
That combo isnt dangerous, I have sportlines with stock everything and no CC plates. The only issue with stock struts/shocks is they are not designed for the lowered springs, so they are not "tuned" for the travel range that the lowered springs give. This would be a big deal if you raced the car and needed the suspension dialed in properly, other wise you will be fine.
Go fot it, my car handles great in the turns now!!!
 
D

Darkhorse845

Banned
Nov 17, 2004
101
0
0
Las Vegas,Nevada
Dec 9, 2004
#13
  • Dec 9, 2004
  • #13
With your Eibach Sportlines just replace
the stock struts and shocks with the
Mach 1 struts and shocks.
 
X

Xcessiv

Member
Jul 16, 2004
187
0
16
Dec 9, 2004
#14
  • Dec 9, 2004
  • #14
Thanks for the info guys. Some people having done the same thing on another car (ex.: Eclipse, Focus and so on) also told me that this combo was especially dangerous when taking curves on bad (bumpy) roads. Did you notice major handling decrease in this specific situation?

Regards,
Yan
 
You must log in or register to reply here.

Similar threads

Suspension A not-so-low lowering spring
  • Justin87
  • Mar 7, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
32
Views
4K
Fox 5.0 Mustang Tech Mar 12, 2024
Justin87
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
516
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
0
Dangerous High RPM at stop/ RPM Jump when switching to Neutral then dies.
  • 02torchvert
  • Dec 17, 2023
  • SN95 4.6L Mustang Tech
Replies
1
Views
1K
SN95 4.6L Mustang Tech Jan 3, 2024
Yel2002GTAuto
Y
SOLD MM coil overs, koni struts, qa1 rears, h&r rear springs and more in NJ
  • 2000xp8
  • Mar 15, 2023
  • Suspension Parts
Replies
3
Views
2K
Suspension Parts Mar 20, 2023
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?