• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Sportlines+295's = cut tires

  • Thread starter Thread starter StangYellow
  • Start date Start date Jun 27, 2008

StangYellow

Founding Member
Sep 11, 2002
1,052
1
39
Jun 27, 2008
#1
  • Jun 27, 2008
  • #1
I have the Eibach Sportline spring kit, Tokico HP's, 18X10 rear's with 295/35 tires. When backing up over things, the rear tire hits the quarter panel, and shaves off the outside of my tire. I already replaced the tire once, and within 2 weeks of putting a new one on, it happened again. Anyone else have this problem? I also noticed my car leans to the right hand side in the rear, and has been like this even with stock wheels/suspension. My car just rolled over to 33K miles (2002). Any suggestions? I thought of rolling the quarters, buying Pro Kit rear springs, or getting spring spacers. Also, the Sportline kit lowered the rear more than the front, and it has had a year to "settle". Suggestions??
 
J

Jbauer

New Member
Jan 20, 2008
506
0
0
Jun 27, 2008
#2
  • Jun 27, 2008
  • #2
wow, thats weird. on New edge mustangs, the sportlines usually leave a pretty good size Gap in the rear..like about 3 fingers worth, and about 2.5 between the tire and fender. and thats with 255 45 17 which have the same overall diameter as the 295.
I remember before i took my isolators out, my rear sat just a tad lower than the front on sportlines, but for me it was actually an illusion. the problem was that it lowered it EXACTLY the same, even though it said 1.8/2.0 drop, and when a mustang sits exactly even fender gap wise, the rear appears to sit lower than the front.

My advice to you, since your car is leaning to the right, even before the sportlines is to get adjustable LCA. Its cheaper than new springs, you can control the ride height down to a decimeter and it helps you out on the 1320
 

mixedbreed02gt

Banned
Oct 6, 2007
0
0
0
Nashville, TN
Jun 27, 2008
#3
  • Jun 27, 2008
  • #3
StangYellow said:
I have the Eibach Sportline spring kit, Tokico HP's, 18X10 rear's with 295/35 tires. When backing up over things, the rear tire hits the quarter panel, and shaves off the outside of my tire. I already replaced the tire once, and within 2 weeks of putting a new one on, it happened again. Anyone else have this problem? I also noticed my car leans to the right hand side in the rear, and has been like this even with stock wheels/suspension. My car just rolled over to 33K miles (2002). Any suggestions? I thought of rolling the quarters, buying Pro Kit rear springs, or getting spring spacers. Also, the Sportline kit lowered the rear more than the front, and it has had a year to "settle". Suggestions??
Click to expand...

295/35/___? 17's or 18's?

I have 315/35/17 on the back of mine with 17x10.5" and eibach sportlines, and tokico Hp shocks, and I had the exact same problem you do. Your car shouldn't be leaning, you either have a faulty spring or you somehow bent a lower control most likely.

Best thing to do, is take it to a body shop and have them roll your fenders.

 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jun 27, 2008
#4
  • Jun 27, 2008
  • #4
i have 17x9 with 275-40-17 & 1-1/4in wheel spacers, the whole out side of my tires are all cut from the quarter panel, i want to roll the lip, but the fender roller costs like $250
 

mixedbreed02gt

Banned
Oct 6, 2007
0
0
0
Nashville, TN
Jun 27, 2008
#5
  • Jun 27, 2008
  • #5
98COBRA281 said:
i have 17x9 with 275-40-17 & 1-1/4in wheel spacers, the whole out side of my tires are all cut from the quarter panel, i want to roll the lip, but the fender roller costs like $250
Click to expand...

Find a body shop that will do it for you for like $100.

someone has that fender roller and can do it for ya.
 
J

Jbauer

New Member
Jan 20, 2008
506
0
0
Jun 27, 2008
#6
  • Jun 27, 2008
  • #6
How are all you people scraping? 315 35 17s leave a hideous wheel gap in the rear. even on sportlines, how are you guys managing to scrape is what i don't understand?
 

mixedbreed02gt

Banned
Oct 6, 2007
0
0
0
Nashville, TN
Jun 27, 2008
#7
  • Jun 27, 2008
  • #7
Jbauer said:
How are all you people scraping? 315 35 17s leave a hideous wheel gap in the rear. even on sportlines, how are you guys managing to scrape is what i don't understand?
Click to expand...


mine isn't hideous...i have a nice drop on mine...but when going over a bump, the wheel/tire travels up higher inside the fender well and catches the lip of the fender.


View attachment 313064

View attachment 313065
 
J

Jbauer

New Member
Jan 20, 2008
506
0
0
Jun 27, 2008
#8
  • Jun 27, 2008
  • #8
No, actually yours doesn't look bad at all. Was the picture you took with the road at an angle or something? or does it always sit like that?

when i was considering 17x10.5, i never liked any of the ones i saw. The overall diameter of a 17x10.5 is less than factory, and on sportlines my 245 45 17s had about a 3.5 finger gap, but yours looks good. Maybe it's because it's not a deep dish
 

mixedbreed02gt

Banned
Oct 6, 2007
0
0
0
Nashville, TN
Jun 27, 2008
#9
  • Jun 27, 2008
  • #9
Jbauer said:
No, actually yours doesn't look bad at all. Was the picture you took with the road at an angle or something? or does it always sit like that?

when i was considering 17x10.5, i never liked any of the ones i saw. The overall diameter of a 17x10.5 is less than factory, and on sportlines my 245 45 17s had about a 3.5 finger gap, but yours looks good. Maybe it's because it's not a deep dish
Click to expand...

actually the 315/35/17 and the 245/45/17 are the exact same size diameter.

the road was not at an angle it was a flat circle drive near a business complex where I took that picture.
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jun 27, 2008
#10
  • Jun 27, 2008
  • #10
heres what mine look like all the way around the tire

 

mixedbreed02gt

Banned
Oct 6, 2007
0
0
0
Nashville, TN
Jun 27, 2008
#11
  • Jun 27, 2008
  • #11
here ya go

View attachment 313062


sorry for the delay....my computer is being a major piece of **** right now and it's pissing me off.
 

StangYellow

Founding Member
Sep 11, 2002
1,052
1
39
Jun 27, 2008
#12
  • Jun 27, 2008
  • #12
mixedbreed02gt said:
mine isn't hideous...i have a nice drop on mine...but when going over a bump, the wheel/tire travels up higher inside the fender well and catches the lip of the fender.


View attachment 313060

View attachment 313061
Click to expand...

Thats exactly what happened to my tire.... twice in the span of a month. hence this thread...
 

TrueBlue03

Member
Dec 9, 2003
372
3
18
Bay Area, CA
Jun 27, 2008
#13
  • Jun 27, 2008
  • #13
ouch... been there done that. it sucks big time. my fenders were shredding my 295 BFG KD's every month or so
Some brands of rims have offsets that sit the wheels out a little bit further than others...causing tire rub when the suspension travels up into the fender.


I replaced my sagging eibachs with roush springs in the rear to bring it up a little, and then i rolled my fenders.

Also, try going to a 285 tire size if you dont want to hassel. My Vredestein 295's fit like a 285 and have full clearance now to travel up and down without touching the fender.
 
You must log in or register to reply here.

Similar threads

Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
401
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
2K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
O
SOLD FS: 18" FR500 chrome wheels and Toyo tires
  • optionizerSS
  • May 21, 2026
  • Other Classifieds
Replies
1
Views
112
Other Classifieds Jun 2, 2026
optionizerSS
O
SN95 The Unicorn
  • HANO Motorsports
  • May 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 15, 2025
HANO Motorsports
SOLD SOLD!!!! 1993 Notchback Roadracer For Sale. She's a beast!
  • Boydster
  • Apr 25, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
1K
Fox Body Mustangs For Sale (1979-93) Apr 25, 2025
Boydster
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?