steering rack noise

tag4car

Member

Nov 21, 2005

0

0

16

Birmingham AL

Sep 22, 2009

#1

• Sep 22, 2009

• #1

what part can i replace to eliminate the screeching squeaking noise from having modified rack geometry?, i have steeda springs on the car and have replaced the bushings with offset, sprayed the inside of the boots covering the tierods with grease and that didn't really help. Embarrassing noise when making a slow speed turn in a parking lot...
Bumpsteer? Balljoints? aluminum bushings? something else?

 

C

cooter_11

Member

Apr 22, 2005

138

0

16

GA

Sep 22, 2009

#2

• Sep 22, 2009

• #2

Did the car make the noise before you lowered it? It may be the balljoints, as you might be putting a lot more stress on them.

You're positive the noise is coming from the rack?

 

wmburns

SN Certified Technician

Aug 14, 2009

5,892

514

204

Houston Texas

Sep 22, 2009

#3

• Sep 22, 2009

• #3

Ford TSB 05-14-3

Isn't there a TSB on this? I had this problem on my 2003 GT. The problem was worse at the extreams of the steering travel.

I fixed my car by using stiffer bushings and lubbing extreamly well.

>>>from Ford TSB
TSB 05-14-3

07/25/05

SQUEAK/CREAK NOISE FROM STEERING RACK
WHEN TURNING

FORD:
2002-2004 Mustang

This article supersedes TSB 04-24-8 to update the Action.

ISSUE
Some 2002-2004 Mustang vehicles may exhibit a squeak or creak type noise when turning.

ACTION
Replace both power steering gear tube brackets.
Refer to Workshop Manual Section 211-02 Steering Gear Mounting. Tighten the steering gear mounting fasteners to 52 lb-ft (70 N.m).

 

tag4car

Member

Nov 21, 2005

0

0

16

Birmingham AL

Sep 23, 2009

#4

• Sep 23, 2009

• #4

absolutely positive it's on the rack, i had the bushings replaced under the tsb and it came back after a few days, there are zerk fittings on the bottom of the ball joints and i give them a shot about every 6-8wks

 

tag4car

Member

Nov 21, 2005

0

0

16

Birmingham AL

Sep 23, 2009

#5

• Sep 23, 2009

• #5

ok, maybe some pix can help

using the flash makes me fee like its sooo dirty under there.... And i think i meant to say that the Tie Rods have the grease fittings...

 

K

Kilgore Trout

Fried or Broiled ?

10 Year Member

Mar 30, 2005

4,749

95

134

Sep 23, 2009

#6

• Sep 23, 2009

• #6

Most likely this is the rack bushings. Which bushings do you have? Stock ones?

 

tag4car

Member

Nov 21, 2005

0

0

16

Birmingham AL

Sep 23, 2009

#7

• Sep 23, 2009

• #7

Kilgore Trout said:

Most likely this is the rack bushings. Which bushings do you have? Stock ones?

Click to expand...

offset prothane

 

evolucion311

Member

Mar 19, 2009

236

2

18

May 19, 2010

#8

• May 19, 2010

• #8

did you ever get this problem figured out?

My car is also experiencing the problem, new A-arms, ball joints, offset urethane rack bushings.