• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Stereda #19 vs trickflow stage 1 cam (Help)

  • Thread starter Thread starter Darek78
  • Start date Start date May 1, 2005

Darek78

Member
Oct 6, 2004
116
0
16
Brooklyn
May 1, 2005
#1
  • May 1, 2005
  • #1
Hey guy's i have a 95 Gt 5.0 and my Q is abaut the cam i need some good advice on picking up a cam i know the computer in sn95 suck when it comes to the cam
but i did a little research and i see people putting e-cam and going to the steeda #19 cam
some people told me to go with trickflow stage 1 cam and i need you to help me out what cam would be the best pick from thouse 3 camshaft's
my mood's are
3.73 gears ,BBK shorty heders, cobra intake ,UD pullies, 70mm throttle body
and has a good tune up done
i went to steeda web site to chceck out the cam but they don't have any info on it when it comes to duration or lift spec's
if some one has all the info on those cams please post them up
for E cam trick flow stage 1 and steeda
i'm leaning closer for a steeda cam but i need some opinions from expirece people

Thank's
Derek.N
 

RIO5.0

15 Year Member
Feb 16, 2001
6,892
8
128
N.H.
May 1, 2005
#2
  • May 1, 2005
  • #2
I run the 19 and have no complaints...As far as choosing one of those??? I choose the 19 for the reasons you mentioned...
I have swapped all kinds of stuff over on mine and the EEC works fine...Have had no issues to speak of, other than real cold weather gives me a few minute surge at start-up...mines driven Summers only tho so I can live with that...
There are a handful of cams that people have had good results with for our year EEC...
I'm by no means a guru so I'll leave it at that...Here is the card that cam with mine..
 

94GT40

New Member
Mar 30, 2005
110
0
0
May 1, 2005
#3
  • May 1, 2005
  • #3
Darek78 said:
Hey guy's i have a 95 Gt 5.0 and my Q is abaut the cam i need some good advice on picking up a cam i know the computer in sn95 suck when it comes to the cam
but i did a little research and i see people putting e-cam and going to the steeda #19 cam
some people told me to go with trickflow stage 1 cam and i need you to help me out what cam would be the best pick from thouse 3 camshaft's
my mood's are
3.73 gears ,BBK shorty heders, cobra intake ,UD pullies, 70mm throttle body
and has a good tune up done
i went to steeda web site to chceck out the cam but they don't have any info on it when it comes to duration or lift spec's
if some one has all the info on those cams please post them up
for E cam trick flow stage 1 and steeda
i'm leaning closer for a steeda cam but i need some opinions from expirece people

Thank's
Derek.N
Click to expand...

Well... I'm not exactly experienced, but I am studying the subject. From what I have read our computers work better with more of a lob separation then most aftermarket cams have. I was going to go with the Trick flow stage 1, but it only has like 112, whereas the Steeda has 115. If you look at the Steeda #18 cam it has the same specs except for the lobe separation.

The lift on that cam is pretty mild, but my parts that I have assembled are pretty mild, and I think I'm going with some 1.7 rockers anyway.

My mods are pretty similar to yours, except I've got GT-40p heads with over size valves. The Steeda #19 for sure.
 
S

slytherin

New Member
Apr 5, 2004
702
1
0
northeast ohio
May 2, 2005
#4
  • May 2, 2005
  • #4
My cobra has the #19 in it and it has an agressive lope at idle and it definetly doesn't come on till 2300rpm give or take a few.
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
May 2, 2005
#5
  • May 2, 2005
  • #5
Have a look in here too.
http://forums.stangnet.com/showthread.php?t=334773

Some real good info for the noobs.
 
You must log in or register to reply here.

Similar threads

A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
704
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
S
Engine 2003 Mach 1 Automatic Upgrades assistance
  • SJK1417M1AT
  • Sep 25, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
288
SN95 4.6L Mustang Tech Dec 21, 2025
01SVTvertt
0
B
Questions Replacing Cam Synchronizer
  • Blackout67
  • Jul 6, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
318
1996 - 2004 SN95 Mustang -General/Talk- Dec 23, 2025
01cstang
0
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
813
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Fox 89’ GT 331 stroker, Trickflow upper/lower, TF#3 Cam, stuffed with forged goodies.
  • 08GT500
  • Nov 6, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
771
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 6, 2025
08GT500
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?