Stewart waterpump + UD pullies

[Green_Meanie]

Will the UD pullies hinder my cooling efficiancy alot?

I will be running a Fluidyne, 180 Tstat, and a Stewart waterpump. I would like to add some UD pullies, but not if it will seriuosly hinder my cooling.

 

[fordfreak$]

pulleys

I have Walsh UD pulleys and my cooling is just as bad as it was before them. I really need a radiator. How much was that fluidyne? ThANKS

 

[Green_Meanie]

I have Walsh UD pulleys and my cooling is just as bad as it was before them. I really need a radiator. How much was that fluidyne? ThANKS

330.00

 

[final5-0]

I run ud pulleys and a 180 stat on my car.

Just the other day I put a Fulidyne and Stewart wp on and got a nice improvment.

There is another thread on this forum about it with more details.

Later
Grady

 

[Green_Meanie]

I run ud pulleys and a 180 stat on my car.

Just the other day I put a Fulidyne and Stewart wp on and got a nice improvment.

There is another thread on this forum about it with more details.

Later
Grady

Yeah, I saw it after I posted. Thanks.

 

[YEAHLOH95]

i'm running that set up only with the vortech water pump pulley and my car runs fine temp wise just see what you can do to get the fan to turn on sooner that helps a bunch they did mine with my chip and that makes the biggest difference . mine runs on the o in normal .