i just bought some subframe connector. should i weld them or bolt them. they were suppose to be custom made for my conv. but i didnt know if it was something i could do my self or not. also if i need to weld them how should i go about keeping them from rusting cause ill be pissed if they start rustin bad.
sub frame help
- Thread starter StonysGT
- Start date
cevtv
Founding Member
hamonkeiser
New Member
Black 93 Fox
Active Member
Sorry got here a little late. Weld diffently and paint over the welds like said many times befor. 
Later,Black 93 Fox
P.S. If you need any other help with the smog pump delete or anything shoot me a im.
Later,Black 93 Fox
P.S. If you need any other help with the smog pump delete or anything shoot me a im.
siege
New Member
I've also heard if you're really concerned about rust, use a weld-through primer first..there's a thread about this somewhere on here....
oldskolbus
Founding Member
Weld them in. A firend of mine bolted his in and the holes look like ovals now. This is the same friend who had cracks in the a pillars(top of the windshield). I guess he got the front tires off the ground one too many times.
I take it these bolt to the seat bolt right? If so, bolt them in tight, and then weld. Finally paint.
After 24 hours, spray a can of Rust preventive oil on the subframes. Depending on how often you drive the car in the rain, re-spray them with the rust proofing oil every once in a while. If it's dry where you are, twice a year is all that's necessary. More so if it rains more often.
After 24 hours, spray a can of Rust preventive oil on the subframes. Depending on how often you drive the car in the rain, re-spray them with the rust proofing oil every once in a while. If it's dry where you are, twice a year is all that's necessary. More so if it rains more often.
