• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

-Sub Frames-, do I need to remove the carpet before welding??

  • Thread starter Thread starter WANT 2 RUN
  • Start date Start date Apr 21, 2006
  • 1
  • 2
Next
1 of 2 Next Last
W

WANT 2 RUN

New Member
Apr 21, 2006
1
0
0
Apr 21, 2006
#1
  • Apr 21, 2006
  • #1
Hey guys, im new to this forum but it looks better then the one i was on before. I've got a question though about weld-in subframes.

Someone told me that the carpet will burn/melt from the heat of the welder. Is this true? The guy is wanting to weld all the joints to make it as strong as possible (not just put a few beads on it in places, so he says). How did you guys go about having it done?

:SNSign:
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Apr 21, 2006
#2
  • Apr 21, 2006
  • #2
if you are welding all the way around then yes remove the carpet unless he welds like an inch at a time on different sides of the car and sfc. I would just take the carpet out and then you can give every thing a good cleaning. Or you can be brave and stand on fire watch and have a garden hose ready I know a few people who soaked the carpet in thier cars before welding in SFC's and it worked but I was like WTF are you doing don't be soo effin lazy.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Apr 21, 2006
#3
  • Apr 21, 2006
  • #3
oh yea and welcome to stangnet this place is one of the best sites for mustangs with alot of smart people.
 

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
Apr 21, 2006
#4
  • Apr 21, 2006
  • #4
got mine fully welded with the carpet in.

But again have an extiguisher ready...
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Apr 21, 2006
#5
  • Apr 21, 2006
  • #5
You can put a bag of ice on carpet inside which will help a lot to keep the temps down and lesson the chance of fire.
Kevin
 

Blakthorn

Member
Jul 24, 2004
299
1
16
US
Apr 21, 2006
#6
  • Apr 21, 2006
  • #6
i left mine in when it was welded
 

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
Apr 21, 2006
#7
  • Apr 21, 2006
  • #7
Mine was welded with carpet inside the car and a running hose next to the car .
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Apr 22, 2006
#8
  • Apr 22, 2006
  • #8
Yep, as mentioned - just "stitch" weld (1" welds varied by location) it and it will be fine.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Apr 22, 2006
#9
  • Apr 22, 2006
  • #9
The dude that did mine was good at what he does. He used the MIG welder and told me that it was pretty easy to use that type and keep the heat localized. No burnt carpet.

I gotta get one and learn how to use it. MIG welding seems to be pretty versatile in what it can do and the gas isn't very difficult to find a vendor for.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Apr 22, 2006
#10
  • Apr 22, 2006
  • #10
tmoss said:
Yep, as mentioned - just "stitch" weld (1" welds varied by location) it and it will be fine.
Click to expand...
My thoughts as well. just run some stitch welds around them meaning weld like an inch them space for about 2-3 then another inch of weld. But i would make sure to weld the ends in solid! Me tho i could'nt see the heat of the welds burning the carpet if you just stich it in now if your going with a solid weld then maybe yes i can see that happening. But then again if you weld it solid all the way around your risking the chance of them warping or possible the frame warping? peace


john
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Apr 22, 2006
#11
  • Apr 22, 2006
  • #11
word of caution - if your going to use a MIG machine for aluminum, get a gun with the spool on the gun - aluminum wire does not push well from the welder. I have a Lincoln 130 amp unit.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Apr 22, 2006
#12
  • Apr 22, 2006
  • #12
Keep in mind also... that you're not welding the connectors to the floor of the car. You're welding to the subframes. There's a pretty healthy gap between the portion of the subframes you're welding to and the floor of the car. The subframes would have to he pretty hot to transfer enough heat to the floor of the car to catch teh carpet on fire.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Apr 22, 2006
#13
  • Apr 22, 2006
  • #13
tmoss said:
word of caution - if your going to use a MIG machine for aluminum, get a gun with the spool on the gun - aluminum wire does not push well from the welder. I have a Lincoln 130 amp unit.
Click to expand...

I think you may be talking to me (not sure). If so, thanks for the tip. When I get one, I want to get one that will allow me to do as much as possible so I'm not buying more stuff or replacing it later because I didn't get what I should have. When the time comes, I'll probably be picking your brain for brand/models etc.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Apr 22, 2006
#14
  • Apr 22, 2006
  • #14
Is a mig weld strong enough for sub frames?
 

ram360

Founding Member
Oct 19, 2002
2,162
1
59
Pennsylvania
Apr 22, 2006
#15
  • Apr 22, 2006
  • #15
Left carpet in and it never burned to the ground.
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Apr 22, 2006
#16
  • Apr 22, 2006
  • #16
willys1 said:
Is a mig weld strong enough for sub frames?
Click to expand...

Absolutely..........did mine with it 6 years ago........
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
Apr 22, 2006
#17
  • Apr 22, 2006
  • #17
I don't mean to hyjack but, tmoss when you puddle weld the lower, did you use your lincoln mig for that? If so what type of "wire" did you use? Any gas?
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Apr 22, 2006
#18
  • Apr 22, 2006
  • #18
I have not used my mig for aluminum yet - I had a guy at the hospital TIG weld them for me but he retired last fall. You (I) need to buy/use the spool gun and the gas bottle for aluminum (argon).
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
Apr 22, 2006
#19
  • Apr 22, 2006
  • #19
I have the spool gun, I just was wondering if there was a flux core wire that would allow me to weld aluminum without having to by the bottle, gas and line. Oh well!
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Apr 23, 2006
#20
  • Apr 23, 2006
  • #20
Sicarius428 said:
You can put a bag of ice on carpet inside which will help a lot to keep the temps down and lesson the chance of fire.
Kevin
Click to expand...

That is exactly how I did mine!
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Some exhaust welding help needed
  • limp
  • May 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
75
Views
8K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2024
General karthief
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
512
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
468
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
5
What's it Worth? 1990 Notchback 5.0
  • 50notch90
  • Apr 14, 2024
  • What is it Worth?!?!?
Replies
4
Views
2K
What is it Worth?!?!? Apr 23, 2024
50notch90
5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?