-Sub Frames-, do I need to remove the carpet before welding??

WANT 2 RUN

New Member
Apr 21, 2006
1
0
0
Hey guys, im new to this forum but it looks better then the one i was on before. I've got a question though about weld-in subframes.

Someone told me that the carpet will burn/melt from the heat of the welder. Is this true? The guy is wanting to weld all the joints to make it as strong as possible (not just put a few beads on it in places, so he says). How did you guys go about having it done?

:SNSign:
 
if you are welding all the way around then yes remove the carpet unless he welds like an inch at a time on different sides of the car and sfc. I would just take the carpet out and then you can give every thing a good cleaning. Or you can be brave and stand on fire watch and have a garden hose ready I know a few people who soaked the carpet in thier cars before welding in SFC's and it worked but I was like WTF are you doing don't be soo effin lazy.
 
The dude that did mine was good at what he does. He used the MIG welder and told me that it was pretty easy to use that type and keep the heat localized. No burnt carpet.

I gotta get one and learn how to use it. MIG welding seems to be pretty versatile in what it can do and the gas isn't very difficult to find a vendor for.
 
tmoss said:
Yep, as mentioned - just "stitch" weld (1" welds varied by location) it and it will be fine.
My thoughts as well. just run some stitch welds around them meaning weld like an inch them space for about 2-3 then another inch of weld. But i would make sure to weld the ends in solid! Me tho i could'nt see the heat of the welds burning the carpet if you just stich it in now if your going with a solid weld then maybe yes i can see that happening. But then again if you weld it solid all the way around your risking the chance of them warping or possible the frame warping? peace


john:p
 
Keep in mind also... that you're not welding the connectors to the floor of the car. You're welding to the subframes. There's a pretty healthy gap between the portion of the subframes you're welding to and the floor of the car. The subframes would have to he pretty hot to transfer enough heat to the floor of the car to catch teh carpet on fire.
 
tmoss said:
word of caution - if your going to use a MIG machine for aluminum, get a gun with the spool on the gun - aluminum wire does not push well from the welder. I have a Lincoln 130 amp unit.

I think you may be talking to me (not sure). If so, thanks for the tip. When I get one, I want to get one that will allow me to do as much as possible so I'm not buying more stuff or replacing it later because I didn't get what I should have. When the time comes, I'll probably be picking your brain for brand/models etc.
 
I have not used my mig for aluminum yet - I had a guy at the hospital TIG weld them for me but he retired last fall. You (I) need to buy/use the spool gun and the gas bottle for aluminum (argon).