Subframe And Control Arm Damage

Depending on where your at, here is one that is in perfect shape, waiting to go to scrap.
e78b40ca0236f31eb6c867ea33f707f0.webp



Sent from my iPhone using Tapatalk
 
Check out the Corral classifieds Guys are always parting out cars. I am not a fan of aftermarket K members on street driven cars unless you need them for extra clearance or swapping motors.


+1

While there are a few nice aftermarket setups, they tend to be a tad bit pricey. For the most part, they are usually designed for cars that are raced or not driven frequently. For a daily driver type car, I'd stay with a beefy stock type unit


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: mikestang63
I've never seen a post where someone broke their stock K member on the street.

That is correct. However, I have seen MANY complain about broken motor mounts, rack mounts. welds, and other failures along with nightmare fitment and alignment issues. IMO IF you need an aftermarket K member, spend the money and go with MM. Not cheap but they make the sturdiest and best engineered- not some cheap chinese copy.

http://forums.corral.net/forums/svt-dohc/197983-do-not-buy-aje-k-member.html
http://forums.corral.net/forums/svt-dohc/187149-what-k-member-do-you-recommend.html
http://www.mach1registry.org/forums/showthread.php?t=58068
http://forums.corral.net/forums/road-racing-auto-x/581327-granatelli-motorsports.html