suspension kits for supercharging...which to get?

[mustangmike23]

hey guys I have a couple of questions regarding superchargers and suspension. I am looking at either the KB 9psi kit or the Cobra killer kit. My questions are:

1) What if any suspension mods do you guys recommend for street? I was looking at the MRT street kit with Hotchkis CC plates and Steeda rear upper and lower control arms.

2) Do i need something crazy like Griggs and go all out or will I be ok with what i suggested?

3) I have the big 18x10 wheels out back so i think the suspension set up i described should be ok and confortable at the same time.

Give me some feedback and other opinions/comments/suggestions. Thaks guys

 

[mustangmike23]

bumpidy bump bump

 

[mustangmike23]

cmon guys can a guy get some help?

 

[MUSTNAG 03]

Is this going to be a strictly street car or do you plan on taking it to the track at all?

 

[mustangmike23]

This is 90% street. I may go to the track once or twice a summer if i even go at all.

 

[tigerdog]

Everyone will have different opinions on this , but I like this set up for a mostly street/occasional strip car:
-Metco uppers and lowers
-Strange Engineering shocks and struts
-Steeda Competition springs
-Metco driveshaft loop
-A good set of Subframe connectors

Hope thais helps...........good luck with your choice