• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

t-56 in fox

  • Thread starter Thread starter 89stang302gt
  • Start date Start date May 22, 2008

89stang302gt

New Member
Mar 29, 2008
8
0
0
May 22, 2008
#1
  • May 22, 2008
  • #1
I'm looking to put a t-56 six speed in my 89 gt and i'm wondering if i have to buy the 2500 dollar kit from ford motorsports or can i use one out of a trans am camaro vette or 4.6 with the change of a bell housing? I know i'll have to switch to 26 spline clutch and shorten drive shaft. If anyone out there has done this swap from one of these cars your help would be greatly appreciated.
Thanks
 

enyawix

Member
Dec 18, 2005
507
0
19
127.0.0.1
May 22, 2008
#2
  • May 22, 2008
  • #2
you can use any t56 but you will need a 5.0 / 5.8 bell housing.


http://forums.corral.net/forums/showthread.php?t=950739
 

89_LX

Member
Sep 16, 2007
63
0
17
Bellingham, WA
May 22, 2008
#3
  • May 22, 2008
  • #3
If your going to buy a new trans i would check out D&D performance They sell everything for the swap in one bolt on kit for the 79-93's

http://www.ddperformance.com/T56 Kit 1979-1993.htm
 

89stang302gt

New Member
Mar 29, 2008
8
0
0
May 23, 2008
#4
  • May 23, 2008
  • #4
Some of the ones i've seen are set up for hydrolic.. Can i jst remove all that and put a mechanical fork and cable in??..
 

Prime Lord

Crappy Default Title
Founding Member
Sep 19, 2000
2,137
199
114
Denver-ish
May 23, 2008
#5
  • May 23, 2008
  • #5
I don't think you can use just ANY T-56. I've done quite a lot of research on the subject and the the main thing I've found is that you have to find one that has the mechanical speedometer connection. Aside from that, the bellhousing is what determines if its hydraulic or not...so as long as you use the 5.0 bellhousing for the T-56, you should be fine. Oh, and you have to relocate/fabricate your own crossmember....and get a longer speedo cable.

When I have money, I'm just buying the D&D kit. Everything is done and you just bolt it in.
 
You must log in or register to reply here.

Similar threads

C
Help with manual conversion
  • CPH89LX
  • Aug 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
706
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
2000xp8
C
Drivetrain T-5 transmission issue
  • Ch3No2
  • Jul 11, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
493
Fox 5.0 Mustang Tech Jul 18, 2025
2000xp8
TKX Install in the Coupe
  • AeroCoupe
  • Apr 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
48
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 26, 2026
Noobz347
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
564
Other Auto Tech Mar 3, 2026
Noobz347
  • Poll Poll
Pull engine & trans together or just engine?
  • ShawnR
  • Jul 14, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
346
1996 - 2004 SN95 Mustang -General/Talk- May 2, 2026
RaggedGT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?