t-56 swap in fox

[LordMustangGT]

I need an awnser tonight before I miss the chance if you can guy/gals

if I buy the t-56 to fit the fox, a stock or aftermarket 99-04 cobra driveshaft is need right? Should bolt right in?

Matt

 

[LordMustangGT]

I just said the hell with it, I now own a t-56.

Crossmember bought too now.

 

[04MystiCobra]

Gonna be a really nice setup!

 

[LordMustangGT]

I still haven't figured out if the 03-04 cobra driveshaft will fit right in or not, anyone know?

Matt

 

[Mustang78]

you'll probably need to get one shortened/lengthened, and possibly have the correct yokes welded on too

~Mark~

 

[LordMustangGT]

the 03-04 cobra driveshafts are 43 1/2 long and stock is the 45 1/2. I'm thinking it should bolt right on,.....

Matt

 

[LordMustangGT]

ok, I bidding on a 03 terminator driveshaft, I feel 90% sure it will bolt right in.

 

[ddonaca351]

I still haven't figured out if the 03-04 cobra driveshaft will fit right in or not, anyone know?

Matt

Call Jeff or Jeff at All Ford Performance in Vancouver, they would know...

(link in the sig)

Dave

 

[macjr]

Matt,
I have a terminator driveshaft in my garage if you want to trial fit it or just replace mine. pm me on doing the clutch. i just need to make room in the garage to work on things.

 

[LordMustangGT]

Matt,
I have a terminator driveshaft in my garage if you want to trial fit it or just replace mine. pm me on doing the clutch. i just need to make room in the garage to work on things.

I bought the driveshaft on monday. I'm doing the clutch at my dads today/tonight so no worries. I still have the turbo and 6speed to put in whenever they show up.

Matt

 

[Mustang78]

i'd do the clutch and T56 at the same time, but thats just me..good luck i really wanna go to BL when this beast is done

 

[LordMustangGT]

lol I would wait but I'm going to spokane tomorrow too, dont have time to wait.

I just took the clutch out and its toast! Napa wont have my flywheel done till 10:30 they said, "it was in pretty bad shape,"

The T-56 will be here tomorrow but I still dont have the crossmember and driveshaft anyways.

This stage 2 Spec should hook!!! Anyone know the break in time,.... I figured 500 miles

 

[04bullit]

lol I would wait but I'm going to spokane tomorrow too, dont have time to wait.

I just took the clutch out and its toast! Napa wont have my flywheel done till 10:30 they said, "it was in pretty bad shape,"

The T-56 will be here tomorrow but I still dont have the crossmember and driveshaft anyways.

This stage 2 Spec should hook!!! Anyone know the break in time,.... I figured 500 miles

well crap, if you're swappin a T-56 in when you get back then you should run the piss out of the car when we get over to Spokane

 

[LordMustangGT]

well crap, if you're swappin a T-56 in when you get back then you should run the piss out of the car when we get over to Spokane

yes and no, I'll still be useing the same spec clutch though, 450mile breakin

 

[Deece]

subscribing