TB question

Its only somewhat worth it IF you pull the upper manifold and take a dremel so the opening of the manifold is 70mm. Might wanna wait until you get an aftermarket manifold.

No, it won't fu ck your car up.
 
Grn92LX said:
Its only somewhat worth it IF you pull the upper manifold and take a dremel so the opening of the manifold is 70mm. Might wanna wait until you get an aftermarket manifold.

No, it won't fu ck your car up.
yea i think i might just wait till i get a intake since i will also need a spacer.

what about getting a e-cam and putting it on a stock car (not for long)
 
You will not see much from the TB so I would wait for a new intake. Cams don't do much if anything on a stock engine. You also can get a better cam then the e-cam. They are a bit dated and there are much better ones out now.
 
You don't have to pull the upper manifold to open-up the intake. Just stuff some rags in the opening and grind away, if everything else is stock on your car, I wouldn't waste the time doing it though.
 
Curse said:
You don't have to pull the upper manifold to open-up the intake. Just stuff some rags in the opening and grind away, if everything else is stock on your car, I wouldn't waste the time doing it though.
well i just have some bolt ons engine is all stock.
bolt ons include CAI, pulleys, exhaust and shifter. thankx guy so intake it is might get a Typhoon intake and also am looking at getting some headers :D