The 4.6 Track Times Thread

98stangv8 · Jan 30, 2009

Year/Model: 1997 gt with a 98 gt block

Mods: stroked to 302, pi intake, vt p&p heads, cams, 70mm tb, c&l plenum, forged internals, SCT dyno tune

FI, NO2 or NA: NA

60 foot: 2.02

1/8 ET and MPH: ?

1/4 ET and MPH: 13.56 @ 104

New times with the blower coming soon!

kyle_99gt · Jan 31, 2009

iv never gone to a track but i want to someday, love reading everything on these forums im on everyday. i dont have much to input because im new but i hope one day to get out to the track. Car right now has pulleys, mangapack exhaust, k/n drop in, 275s for tires. Would like to put some gears on but its my dd and im worried about gas mileage, since gas up here in vancouver is way more expensive than everywhere else.Hopefull to get to the track this summer and put a bad time up wish me luck.

Winters98GT · Jan 31, 2009

I applaud your efforts, but it has been posted before and the list is ongoing for many years now. Bill Putnam has put it together for us.

Best 4.6 ET/MPH's - Corral Forums

mustangman9812 · Jan 31, 2009

Winters98GT said:
I applaud your efforts, but it has been posted before and the list is ongoing for many years now. Bill Putnam has put it together for us.

Best 4.6 ET/MPH's - Corral Forums

well about time we had a stangnet one

kyle_99gt · Jan 31, 2009

Winters98GT said:
I applaud your efforts, but it has been posted before and the list is ongoing for many years now. Bill Putnam has put it together for us.

Best 4.6 ET/MPH's - Corral Forums

i dont see the mods on that forum though which is very helpful to see.

COramprat · Jan 31, 2009

Check the 1st post for accuracy. I'll post it by itself when I get more entries.

mustangman9812 · Jan 31, 2009

I like it! after some dressing up it will look good. For things like members N20 or boost have like hp shot and boost in quotations ex. (100hp) or (10lb)

Looks Great Though! Its about time we (Stangnet) had our own list

:SNSign: FTW

Stan Weiss · Jan 31, 2009

Maybe it is just me, but I think you should add another column "Trans. Type"

02nightmaregt · Feb 1, 2009

Well i only have a time from when i was stock. I ran it at an 1/8th mile track but i dont remember my times, and i hate 8th mile tracks.
Bone stock
14.3-1st and 2nd run
14.01-3rd
I really want to get back soon and see what i can get out of her

Mike97gt · Feb 1, 2009

COramprat said:
Right now I'm just going to be working with 4.6 but since yours is a unique situation I'll include it with the bore and stroke as a mod. Maybe one of the 5.0 mods can work with a list there. Eventually I'd like a self posting database so taht everyone can get involved and update as needed.

Coram I think all modulars should be included.. he would not be able to be listed with the 5.0's if they had a list since his car is not a windsor, even if he shares the same displacement with a 302 that would be the END of anything similar

crzyhrse99 · Feb 1, 2009

Year/Model: 99GT 5sp

Mods:CAI, TB, plenum, UD, OR X, SLP LM2 CB, 3.73's, FRPP clutch, steeda tri-ax, DSP, street tire

FI, NO2 or NA: N/A

60 foot:1.90

1/8 ET and MPH:8.78@81.5

laserstang21 · Feb 8, 2009

1st best
r/t .620
60' 1.889
330' 5.561
1/8 8.610
mph 78.22
1000' 11.203
1/4 13.418
mph 101.53

2nd best
r/t .586
60' 1.927
330' 5.599
1/8 8.646
mph 78.20
1000' 11.243
1/4 13.458
mph 101.49

mods: slp lmII's, o/r x-pipe, bbk 75mm throttle body, dragon intake plenum, h&r ss springs, 315/35/17 sumitumo htrz tires

JBVobra · Feb 9, 2009

Year/Model: 2004 cobra vert

Mods: 2.76 pulley, magnaflow xpipe and catback, jlt rai, afco h/e, HPP tune

FI, NO2 or NA: factory unported eaton

60ft... 1.947
330.... 5.139
1/8.... 7.781
mph... 94.32
1000.. 10.035
1/4... 11.946
mph.. 118.61

rear tires 275/40 17" nitto 555r, car weight 3915 with driver

COramprat · Feb 9, 2009

Bear with me on updates...I'm working on a format making it easier to read.

stangman98 · Feb 17, 2009

Year/Model: 1998 GT

Mods: PI, and a bunch of other stuff

FI, NO2 or NA: NA

60 foot: 1.6

1/8 ET and MPH:

1/4 ET and MPH: 12.78 @ 105.45 MPH

COramprat · Feb 17, 2009

stangman98 said:
Year/Model: 1998 GT

Mods: PI, and a bunch of other stuff

FI, NO2 or NA: NA

60 foot: 1.6

1/8 ET and MPH:

1/4 ET and MPH: 12.78 @ 105.45 MPH

"A bunch of other stuff" doesn't work on everyones car. Give me a quickie on the go-fast stuff. 12.7's is pretty stout for a PI swapped car.

stangman98 · Feb 17, 2009

P&P stock compression pi swap
stock bottom end
Densecharger CAI
Stock MAF
UPR Upper
Hooker Long Tubes and X
Dynomax welded bullets
4.10's
Detroit Locker
31 spline strange axles
Centerforce DF
Stock T45
3350lbs with me in it.
What else you want to know

mustanggt04fast · Apr 12, 2009

r/t .463
60' 2.079
330 5.894
1/8 9.008
mph 79.58
1000 11.656
1/4 13.917
mph 101.19

Tim2002GT · Apr 12, 2009

Mods: 4.10's, Steeda lca's, o/r x, JLT RAI, 75mm TB, TF plenum, MT ET Street radials

FI, NO2 or NA: 125 shot HarrisSpeedworks wet nozzle kit

I was in the right lane...

COramprat · Apr 20, 2009

Updated 4/20

The 4.6 Track Times Thread

98stangv8

Active Member

kyle_99gt

Member

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

mustangman9812

kyle_99gt

Member

COramprat

...I can take it. I think.

mustangman9812

Stan Weiss

Member

02nightmaregt

To hell with your Mustang, I want to see your HOG!

Mike97gt

it doe snot

crzyhrse99

Active Member

laserstang21

New Member

JBVobra

COramprat

...I can take it. I think.

stangman98

COramprat

...I can take it. I think.

stangman98

mustanggt04fast

Member

Tim2002GT

COramprat

...I can take it. I think.

Similar threads

The 4.6 Track Times Thread

Active Member

Member

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Member

...I can take it. I think.

Member

To hell with your Mustang, I want to see your HOG!

it doe snot

Active Member

New Member

...I can take it. I think.

...I can take it. I think.

Member

...I can take it. I think.

Similar threads

Privacy & Transparency

Privacy & Transparency