• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

The mustang has rough idle and won't smooth out

  • Thread starter Thread starter Helltime
  • Start date Start date Apr 27, 2005
H

Helltime

New Member
Apr 27, 2005
9
0
0
Des Moines
Apr 27, 2005
#1
  • Apr 27, 2005
  • #1
Me and my dad are working on an 83 mustang GLX 5.0 5speed and we can't get the idle to smooth out. We put a new edlebrock carb, plugs, wires, cap, rotor and coil and tuned the carb and the idle will not smooth out because it still has a miss. Would a small vaccum leak cause this. Any suggestions will be greatly appretiated. Thank You
 

BlackGT89

Member
Dec 16, 2002
774
8
18
Huntsville, AL
Apr 28, 2005
#2
  • Apr 28, 2005
  • #2
Helltime said:
Me and my dad are working on an 83 mustang GLX 5.0 5speed and we can't get the idle to smooth out. We put a new edlebrock carb, plugs, wires, cap, rotor and coil and tuned the carb and the idle will not smooth out because it still has a miss. Would a small vaccum leak cause this. Any suggestions will be greatly appretiated. Thank You
Click to expand...

Is it a ramdom miss or a constant miss ? If it's a constant miss try to isolate which cylinder is missing and what is causing the miss. Take a rag and place it under / around the tailpipe and see if you get a flapping sound as if it's trying to suck the rag back into the tailpipe. That will at least tell you which side the miss is on.
 
H

Helltime

New Member
Apr 27, 2005
9
0
0
Des Moines
Apr 28, 2005
#3
  • Apr 28, 2005
  • #3
We think it is cylinder 8 because that doesn't seem to make any difference when the plug wire is clear off. We do have a vaccum leak but at 800rpm it is pulling 21pounds of vaccum even with the leak.
 

BlackGT89

Member
Dec 16, 2002
774
8
18
Huntsville, AL
Apr 29, 2005
#4
  • Apr 29, 2005
  • #4
Helltime said:
We think it is cylinder 8 because that doesn't seem to make any difference when the plug wire is clear off. We do have a vaccum leak but at 800rpm it is pulling 21pounds of vaccum even with the leak.
Click to expand...

If it's a constant miss on one cylinder and it is getting a good spark it sounds like it's loosing compression in that cylinder. If fixing the vacuum leak doesn't clear up the miss, it might be time for a compression test.
 
H

Helltime

New Member
Apr 27, 2005
9
0
0
Des Moines
Apr 29, 2005
#5
  • Apr 29, 2005
  • #5
Thank you I will see if I can get my dad to fix the leak then hopefully it will run smoother. The idle doesn't bother me it just bothers my dad.
 
You must log in or register to reply here.

Similar threads

A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
727
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
1
Engine 91 mustang 302 Low acceleration car backfires pops and acts like it doesn’t want to take fuel
  • 1991Fox5.0
  • Oct 4, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Oct 6, 2025
1991Fox5.0
1
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
D
Engine 85 GT Backfires through Carb
  • DienstXIV
  • Oct 3, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
706
Fox 5.0 Mustang Tech Oct 7, 2025
85GTStangGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?