The Post Your Drag Strip Results Thread!

cleveland · Aug 6, 2005

This is for 05 GTs and V6 owners only.

1. List track, date, time and the weather conditions if available.
2. List the RWHP and RWTQ of dyno and type (Dynojet or Mustang Dyno) if available.
3. Weight of vehicle if available with driver.
4. Complete list of mods at time of drag and trans type.
5. List the 60ft, 1/8 and of course the 1/4 E.T. with the 1/8 and 1/4 MPH too.
6. List the rear wheel tire pressure and launch rpm.

Lets do this so we can get a better idea as to how to better our times and speeds.

-Dan

bleedingvayneAD · Aug 6, 2005

Since you seem to be the father of this thread, why don't you go first...

cleveland · Aug 6, 2005

No power adder run.

1. Sacramento Raceway / 07.29.05 / 6:38pm / Hot @ about 85*
2. 275RWHP@5600 / 265RHTQ@5350 / Mustang Dyno
3. N.A.
4. 91 Octane Diablo Sport Tune & JLT CAI / SLP Loudmouth Axle-Backs / Eibach Sportline Lowering Springs / Automatic with Overdrive and TC Off
5. NA 60ft, 8.906 1/8 @ 80.865, 13.723 1/4 @ 101.485.
6. 50psi and brake stall @ 2500rpm.

Nitrous run.

1. Sacramento Raceway / 07.29.05 / 7:59pm / Hot @ about 85*
2. 365RWHP@5850 / 336RHTQ@5350 / Mustang Dyno
3. N.A.
4. 91 Octane Diablo Sport Tune & JLT CAI / SLP Loudmouth Axle-Backs / Eibach Sportline Lowering Springs / Automatic with Overdrive and TC Off / Nitrous Express 100hp shot
5. 2.087 60ft, 8.464 1/8 @ 87.750, 12.926 1/4 @ 112.729.
6. 50psi and brake stall @ 2500rpm.

-Dan

Turbo 05 · Aug 7, 2005

did you say 50 psi? wtf the stock tire pressure for this car is 32 psi why are you running 50 psi?

bty 13.58 103 bone stock fontana

cleveland · Aug 7, 2005

The tires clearly have 51 psi printed on them.

-Dan

Turbo 05 · Aug 7, 2005

page 119 owners manual

Always inflate your tires to the Ford recommended inflation pressure
even if it is less than the maximum inflation pressure information found
on the tire. The Ford recommended tire inflation pressure is found on
the tire label or certification label which is located on the B-Pillar or the
edge of the driver’s door. Failure to follow the tire pressure
recommendations can cause uneven treadwear patterns and adversely
affect the way your vehicle handles.

just more info
Description: Proper tire inflation pressure is the specified air pressure given by a carmaker for a certain tire on a specific vehicle. This pressure specification should not be confused with a tire's maximum pressure, which is usually listed on the tire's sidewall. Some vehicles may specify different pressures for the front tires and the rear tires.

cleveland · Aug 7, 2005

Turbo 05 said:
page 119 owners manual

Always inflate your tires to the Ford recommended inflation pressure
even if it is less than the maximum inflation pressure information found
on the tire. The Ford recommended tire inflation pressure is found on
the tire label or certification label which is located on the B-Pillar or the
edge of the driver’s door. Failure to follow the tire pressure
recommendations can cause uneven treadwear patterns and adversely
affect the way your vehicle handles.

just more info
Description: Proper tire inflation pressure is the specified air pressure given by a carmaker for a certain tire on a specific vehicle. This pressure specification should not be confused with a tire's maximum pressure, which is usually listed on the tire's sidewall. Some vehicles may specify different pressures for the front tires and the rear tires.

Ok, that really doesnt say much. If it helps, the tires came with ~50 psi from the lot and 30 psi is clearly under inflated and effects my gas mileage severely. The whole point is that I know what proper tire inflation looks like and what improper inflation looks like.

And back to the topic please.

-Dan

lostsoul · Aug 7, 2005

I thought for doing the stip you want low air pressure on your tires to give you that awsome wrinkle sidewall effect ;-) .. 25psi sounds good

cleveland · Aug 7, 2005

lostsoul said:
I thought for doing the stip you want low air pressure on your tires to give you that awsome wrinkle sidewall effect ;-) .. 25psi sounds good

yeah, I kinda forgot to check the psi and paid for it with poor 60 foots...

-Dan

Motorhead6T5 · Aug 7, 2005

I never relized that you were so local to me. Whens the next time you plan on going to sac?

cleveland · Aug 7, 2005

Motorhead6T5 said:
I never relized that you were so local to me. Whens the next time you plan on going to sac?

within 2 weeks if I can get 4:10 installed and the LCAs too. I prefer the Friday night test&tune for unlimited runs.

-Dan

Motorhead6T5 · Aug 7, 2005

cleveland said:
within 2 weeks if I can get 4:10 installed and the LCAs too. I prefer the Friday night test&tune for unlimited runs.

-Dan

I can come down and video if you want,probably run my car too.

cleveland · Aug 7, 2005

Motorhead6T5 said:
I can come down and video if you want,probably run my car too.

Good deal plus I'd love to see another 05 GT strutting its stuff out there.

I'll continue to post about getting back out there since I'll have a few install threads coming up. I am in a buying mood today and already went for the Throttle Body Spacer and Lower Control Arms. When I get to work I'll see if I can get the 4.10s at a decent price.

Before Im back at the track though my bottle valve will be mounted right behind the turned down rear seat. Im having a custom bracket mount made this Tuesday (if I dont mind giving my car up for an overnighter) that will mount the bottle forward and off the trunk floor so I can still run a spare tire if I feel like it. I found the bracket that I love btw...

View attachment 507758

-Dan

cleveland · Aug 9, 2005

Anybody else care to add some drag times?

-Dan

DANNNY · Aug 9, 2005

05 gt auto

cleveland said:
Anybody else care to add some drag times?

-Dan

Orlando FL. wet&hot run 13.632 in the 1/4 at 102.91mp.

AdrenalineRush · Aug 10, 2005

No power adder run.

1. St-Élie airport / at night/ no glue / fairly cold
2. Stock 2005 GT
3. Stock manual GT weight with almost empty tank + driver....heu...let's say a low low 215 pounds!
4. 91 Octane pump gas/5 speed manual trany and TC Off
5. NA 60ft, 9.06 1/8 mile (speed n/a), no quarter mile
6. 20 psi, launch at @ 2500rpm.

It was only a 1/8 strip...but i'll go on a quarter soon, i'll be back with some more info...

Have a good day!

racegirl1 · Aug 10, 2005

Hey Turbo,

Are you going to Fontana this weekend? I'm taking the 05 GT 5 SPD for the first time on BFG'S KDW'S street tires 295 in the rear and just wanted some launching tips? I want to do this with T/C off. As you know this is a quarter mile track and I want to avoid that nasty wheel hop. Now I'm not very good at this whole drag racing thing, but it sure looks like fun so for $20.00 for the night I want to take my car and see how I do. It's hot in Fontana so I'm guessing it will probably be in the 90's.

Cleveland: If you can also give any tips on the proper launch its appreciated.

Current Mods:
1. Steeda Underdrive Pulleys
2. Magnaflow after the cat x-pipe (I'm using the stock factory cats)
3. Magnaflow magnapacks

Using magnaflows chassis dyno March 2005:
284 RWH
301 FT TORQUE

300bhp/ton · Aug 11, 2005

cleveland said:
Ok, that really doesnt say much. If it helps, the tires came with ~50 psi from the lot and 30 psi is clearly under inflated and effects my gas mileage severely. The whole point is that I know what proper tire inflation looks like and what improper inflation looks like.

And back to the topic please.

-Dan

wow Dan you doin some heavy hauling with those tyre pressures???

I think the 50psi is the MAXIMUM inflation pressure for the tyre carkus not the RECOMMENDED pressure for your car, a subtle but BIG difference. 30-35psi is about right for 99% of cars on the road unless they are very oddball.

PS nice ET with nitrous

audionut · Aug 11, 2005

1: Moroso Motorsports Park, 10:00 PM June 24th, 89 degrees, 90% humidity.
2: 296.2 hp, 314.1 tq on a dynojet.
3: spare tire taken out, my 220 lb but in the driver seat.
4: All mods in my signature were on the car.
5: 60 ft: 1.931, 1/8 mi: 8.417 @ 83.38, 1/4 mi: 13.098 @104.99.
6: Nitto 555R drag radials @ 18 psi, launch rpm: 4000 rpm

4.10 gears will be going in soon as well as a spec stg 2 clutch and slicks. With these mods and some cooler weather I hope to me mid 12's.

fazm83 · Aug 11, 2005

1. Firebird raceway, march, 80s for air temp, dont know track temp, 15-25% humidity.
2. No dyno done, stock v6 manual
3. Care completely loaded with spare and everything, plus 210lb driver (6'4")
4. Stock
5. See my signature
6. stock tire pressure (35-40psi) and bogging the engine to start (1500rpm launch)

The Post Your Drag Strip Results Thread!

cleveland

bleedingvayneAD

New Member

cleveland

Turbo 05

New Member

cleveland

Turbo 05

New Member

cleveland

lostsoul

New Member

cleveland

Motorhead6T5

New Member

cleveland

Motorhead6T5

New Member

cleveland

cleveland

DANNNY

New Member

AdrenalineRush

New Member

racegirl1

New Member

300bhp/ton

New Member

audionut

New Member

fazm83

New Member

Similar threads

The Post Your Drag Strip Results Thread!

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency