So i have been thinking of getting a v8 for a while now, i have had 2 other cars i have been working on one was dsm the other was a rx7 i got the rx7 in the 13's was upset after all the work i did to be so low.. then built the rx7 and was equally disappointed.
So i have been looking online and around my town for a v8 i can get into the 12's high or low 13's. Well the reason im here is to see what you guys think about the car i went and test drove today.
87 5.0
E7 heads with almost everything that can be done to them i.e. port polish. And chromoly pushrods by trick flow, 550 lift springs
A/C delete
arp headbolts, new lifters
Typhoon polished intake
pro products 65 mm throttle body
anderson powerpype
pmas 80mm mass air
36 lb injectors
fmu system and 255 fuel pump underdrive pulleys w/ billet ac delete kit, 10 lb pulley
water pump and double r timing chain new
3 core radiator w/ electric fan
worldclass t5 built by southwest gear 3.73 gears, b&m shortshift
Bbk shorty headers and 40 series flowmasters
It has pony wheels with "ok" tread on the tire and also it comes with a set of slicks (mickey thompson et streets) and skinnies on polished welds.
Guy said he ran a 12.9 ( we are at almost 5000 feet here so thats pretty good for around here i am moving though to san Antonio so it should run a faster time there.)
Thank you for reading tell me what you think
There is also this cari havent looked at but its 2000 less than the previous
96 cobra
leather 5speed
76 k miles
BBK longtube headers
flowmaster
410 ford racing gears
So i have been looking online and around my town for a v8 i can get into the 12's high or low 13's. Well the reason im here is to see what you guys think about the car i went and test drove today.
87 5.0
E7 heads with almost everything that can be done to them i.e. port polish. And chromoly pushrods by trick flow, 550 lift springs
A/C delete
arp headbolts, new lifters
Typhoon polished intake
pro products 65 mm throttle body
anderson powerpype
pmas 80mm mass air
36 lb injectors
fmu system and 255 fuel pump underdrive pulleys w/ billet ac delete kit, 10 lb pulley
water pump and double r timing chain new
3 core radiator w/ electric fan
worldclass t5 built by southwest gear 3.73 gears, b&m shortshift
Bbk shorty headers and 40 series flowmasters
It has pony wheels with "ok" tread on the tire and also it comes with a set of slicks (mickey thompson et streets) and skinnies on polished welds.
Guy said he ran a 12.9 ( we are at almost 5000 feet here so thats pretty good for around here i am moving though to san Antonio so it should run a faster time there.)
Thank you for reading tell me what you think
There is also this cari havent looked at but its 2000 less than the previous
96 cobra
leather 5speed
76 k miles
BBK longtube headers
flowmaster
410 ford racing gears