time to start the winter mods

[srtthis]

I like the homemade oil pump primer. Good stuff

what can i say im cheap and have a load of them things laying around at work

 

[Rick 91GT]

D, hoping to have heads done for this weekend Ill shoot ya a email

 

[srtthis]

thanks man! if they can i can come pick them up sunday. just lemme know what the final total is so i know how much cash to bring up with me. i'll bring the trickflows with me also unless he's changed his mind.

 

[srtthis]

also... the 200MPH have been put up for sale so if they sell i'll be adding a few more things to the build. its going fast 1 way or another

 

[srtthis]

Plan today to clean the garage up push the car out and hose it off. Maybe clean up the trans case

 

[srtthis]

got offered this intake for my 200mph saleen gauges

think im going to pass on this offer but i may take him up on the offer for a set of 99 cobra 95 cobra r or 2000 cobra R wheels and sell those to buy the nitrous kit

 

[NIKwoaC]

Home fabbed box? Those can sometimes be very hack. It might be nicely fabricated but the airflow characteristics could be seriously hosed. I would have passed on it too.

 

[RacEoHolic330]

I agree. Unless there are CFM ratings for that intake, I wouldn't touch it.

 

[srtthis]

in the email he said it flows 300CFM the lower was ported by panhandle performance. 1" tapered spacer and a 80MM wilson throttle body.

but i def got the itch to go bang some gears....

 

[srtthis]

i SHOULD have the car running by sunday if rick gets the heads done tonight need to get the car out of the garage and down to the shop to stay with the race car while i have some one rewiring the garage.

now do i put the street tires on it and have some fun on do i leave the radials on it and REALLY have some fun.

 

[srtthis]

 

[Rick 91GT]

Damn those heads looks nice

 

[srtthis]

i didnt even want to paint them... ended up just clearing them they came out so clean!

 

[srtthis]

Finally finished porting the gt40 lower... More so cleaned up the parting lines and cast finish in the runners. And removed the 2 bumps for the screws

 

[srtthis]

 

[Rick 91GT]

Hey before you bolt that on, drill and tap the Air Intake Sensor into the runner, the A9L processor really likes the sensor in the intake runner.

 

[srtthis]

you think its better off there then in the main runner of the upper where i have it now??

 

[Rick 91GT]

Yes

 

[srtthis]

ok i will see if i can find a plug for the upper tonight and tap the lower.

 

[srtthis]

My dumb ass forgot the in dip stick