• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Timing change

  • Thread starter Thread starter St4ng07
  • Start date Start date Jan 14, 2006
S

St4ng07

New Member
Jan 11, 2006
3
0
0
Jan 14, 2006
#1
  • Jan 14, 2006
  • #1
What timing degree do you guys have your 5.0's I've heard go 14-18 degrees. What happens if you go more?
 

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
Jan 14, 2006
#2
  • Jan 14, 2006
  • #2
If your engine is stock I recommend no more than 14
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 15, 2006
#3
  • Jan 15, 2006
  • #3
The guys with higher static advance are probably running alum heads.

There is no magic number - no one's motor, combo, etc are the same. Just gotta keep bumping till ya hear ping and then back it down a couple.

Good luck.
 
J

JRPony

New Member
Jun 10, 2005
83
0
0
Las Vegas, NV
Jan 15, 2006
#4
  • Jan 15, 2006
  • #4
St4ng07 said:
What timing degree do you guys have your 5.0's I've heard go 14-18 degrees. What happens if you go more?
Click to expand...
Detonation. This is not good. Uncontrolled, violent explosions which can cause catastrophic engine damage. Don't do it.
 
S

St4ng07

New Member
Jan 11, 2006
3
0
0
Jan 15, 2006
#5
  • Jan 15, 2006
  • #5
Yeah I know that. I was thinking of running like 16 degrees.So far thats the best I've heard and read. Just want some more opinions. I have a 91' Mustang GT manual trans. I have a good amount of mods.....Flowmaster cat-back exhaust with high flow cat,4.10 gears,bbk cold-cold air intake(fenderwall mount),and short throw shifter. Next upgrades..Edelbrock upper and lower intake,corba rockers, and some type of long tube headers.


and thanks for all the help.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 15, 2006
#6
  • Jan 15, 2006
  • #6
St4ng07 said:
Yeah I know that. I was thinking of running like 16 degrees.So far thats the best I've heard and read. Just want some more opinions. I have a 91' Mustang GT manual trans. I have a good amount of mods.....Flowmaster cat-back exhaust with high flow cat,4.10 gears,bbk cold-cold air intake(fenderwall mount),and short throw shifter. Next upgrades..Edelbrock upper and lower intake,corba rockers, and some type of long tube headers.


and thanks for all the help.
Click to expand...
If you read my above-reply, that should be a safe way for you to maxmize your ignition advance.

FWIW, there is a point where you go too far - power will start to decline, but this happens before detonation might occur. Another reason to not run on the ragged edge of detonation.

Good luck.
 
You must log in or register to reply here.

Similar threads

1
Crank no start on a turbo and cammed pushrod 5.0
  • 1630stri
  • Sep 2, 2026
  • Digital Self-tuning Forum
Replies
2
Views
213
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
S
4.6 spitting o-rings out of 2 injectors
  • skidad
  • Sep 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
78
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
skidad
S
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
237
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?