trans?

[four six]

Ok I have a 98 GT 5 speed. Its got the stock T45, my brother had a 03 mach 1 and offered me his back up trans for dirt cheap. I want it bad because mine is shot. the prob is the trans out of the mach 1 is a Tremic 3650 (correct me if Im wrong) since the pick up is diffrent can and or how can his trans work in my 98?

 

[GoBabyVroommm]

It will bolt right in if i'm not mistaken. If it was a T56 then you would have to modify things.

 

[Mike97gt]

only problem is the 98 used a VSS sensor and the 03 mach uses a output shaft speed sensor.

 

[four six]

thats what I was saying with the diffrent types of pick up. IDK he said it will work he's a mechanic. All I know this price is too good to pass up

 

[98gtblue]

I don't know everyone told me it won't work even a mustang performance shop. I just replaced mine with a TKO 500. Maybe you can ghetto rig it. Good luck.

 

[01GTSTANGER]

I would check with a ford tech before purchasing/attempting to do anything. Just my 2 cents

 

[four six]

My step dads a Ford tech and he said it should work. Just have to fab some stuff and rig it. IDK as long as it works I need atrans and Im broke so this better work. He said all I need is the yoke for the driveshaft, since its stronger.

 

[four six]

ok so I just saw this on a mustang part site about my swap. This transmission will work for a 96-98 transmission mount the speedometer sensor has to be swapped out with the toner ring out of a 98 transmission. Also you have to rewire the reverse light.

 

[four six]

TRANS IS IN!! Along with a 10.5 King Cobra Clutch:SNSign: Drives much better now. Has stck mach 1 shifter. Th only thing wrong is no speedo, I ordered a dallas mustang speed cal to fix that. Well I got a stronger trans for cheap

 

[shelbe67]

just wondering my buddy just put a 3650 in his 96 how did the speed cal work for you? also what else did you have to do? please clue me in he keeps bugging me and I know nothing bout the newer cars thanks