• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tremec TKO Question

  • Thread starter Thread starter mustangmarks
  • Start date Start date Oct 30, 2005
M

mustangmarks

New Member
Dec 14, 2004
102
0
0
Oct 30, 2005
#1
  • Oct 30, 2005
  • #1
Is it ok to put the fluid in through the shifter rather than putting it in the fill hole?
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Oct 30, 2005
#2
  • Oct 30, 2005
  • #2
yes...that the only way i do it really
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Oct 30, 2005
#3
  • Oct 30, 2005
  • #3
in my T-5 i use a small pump from local parts store...about $7...........works like a charm!
but you can also pour it thru shifter mounting point as well.
Jack
 
1

1SLO306

My 97 GTP owns you ALL!
Mar 31, 2005
904
1
17
Muhlenberg, ky
Oct 30, 2005
#4
  • Oct 30, 2005
  • #4
that how i put mine in! i also have a question. Is the only fluid u can use syncromesh or is thier something a little cheaper that u can use?
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Oct 30, 2005
#5
  • Oct 30, 2005
  • #5
according to the manual I found at TTC you can use any dextron II.
Jack
 
M

mustangmarks

New Member
Dec 14, 2004
102
0
0
Dec 17, 2005
#6
  • Dec 17, 2005
  • #6
Modular2v said:
yes...that the only way i do it really[I did this and now my car is leaking fluid. When I put it through the shifter I also jacked up the back of the car 3 feet in the air so it would go quicker. Do you think fluid got in somewhere it shouldn't be? Its leaking from the top and where the driveshaft meets the tranny? Any help would be appreciated.
Click to expand...
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Dec 17, 2005
#7
  • Dec 17, 2005
  • #7
mustangmarks said:
I did this and now my car is leaking fluid. When I put it through the shifter I also jacked up the back of the car 3 feet in the air so it would go quicker. Do you think fluid got in somewhere it shouldn't be? Its leaking from the top and where the driveshaft meets the tranny? Any help would be appreciated.
Click to expand...

How much fluid did you put it? Do you have the stopper or D/S in the tailshaft?
 
S

SmockDoiley

New Member
Jun 14, 2003
1,591
2
0
San Diego, CA
Dec 17, 2005
#8
  • Dec 17, 2005
  • #8
Why are you all pouring through the shifter??? Isnt that taking more time undoing all that shifter crap and boot?? Your suppose to have the fill hole open anyways so you can tell when its full. You fill the tranny until it starts to leak out of the fill hole. If you are jacking up the vehicle or tranny in anyway, its going to throw off the level at the fill hole, and you could potentially be adding too much fluid. Unless of course, you know the exact amount to add, and you already know how much is in there. Is this a first time fill, fill up, or did you drain the tranny, and now you need to fill it up? If it wasnt leaking before, and now it is, you probably have too much in there. Your best to just stick with the right way of filling it, since it is faster anyways. Undo the lower nut to drain it, and then close it up when done. Then undo the top fill nut, and use a pump until the fluid starts to leak out, voila, your done.
 
S

SmockDoiley

New Member
Jun 14, 2003
1,591
2
0
San Diego, CA
Dec 17, 2005
#9
  • Dec 17, 2005
  • #9
As for fluid, I'm not sure if it can take other fluids, but in my opinion, since its a $1600 transmission, I would just stick to the synthetic fluid that is recommended.
 
M

mustangmarks

New Member
Dec 14, 2004
102
0
0
Dec 29, 2005
#10
  • Dec 29, 2005
  • #10
tunedin302 said:
How much fluid did you put it? Do you have the stopper or D/S in the tailshaft?
Click to expand...
3 Quarts not sure what kinda of tailshaft but it leaks. I definatly over filled it because a good quart all together leaked out,but stoped after it did and just left little drips I checked the fluid level and it was perfect but still leaves little spots any suggestions?
 

408stroker5.0

The world would be a better place if all males jus
Mar 10, 2004
639
0
16
Bonnyville, Alberta, CANADA
Dec 29, 2005
#11
  • Dec 29, 2005
  • #11
I was told when I bought my TKO to use syncromesh fluid only. Anything else would also void warranty. Do not use Dextron.

Shon
 

CBZGT50

New Member
Apr 21, 2005
171
0
0
St Louis area
Dec 30, 2005
#12
  • Dec 30, 2005
  • #12
408stroker5.0 said:
I was told when I bought my TKO to use syncromesh fluid only. Anything else would also void warranty. Do not use Dextron.

Shon
Click to expand...


If I have to use sychromesh, why don't they buy it. Damn, it's like putting gold in gold!

amnit:
 

S&B

I hate my CT. :(
10 Year Member
Dec 18, 2005
1,634
695
204
Cheesehead
Dec 30, 2005
#13
  • Dec 30, 2005
  • #13
i think i used royal purple syn. fluid
 
You must log in or register to reply here.

Similar threads

Engine Bleeding air in the heater core
  • keel
  • Apr 2, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
272
Fox 5.0 Mustang Tech Apr 23, 2026
limp
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
466
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
429
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
264
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
G
S550 Headers
  • gray owl
  • Feb 1, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
0
Views
256
2015 - 2023 (S550) Mustang -General/Talk Feb 1, 2026
gray owl
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?