Trick flow high ports, mild cam, stock pistons???

95CobraMike

Active Member

Apr 12, 2004

1,046

0

36

Lima OH

Feb 21, 2006

#1

• Feb 21, 2006

• #1

Does anyone have any experience with trick flow high port heads? would the valves clear stock pistons with a small/mild cam (comparable to trick flow stage 1 cam/ wolverine 1190 .493/.510 lift 212/222 lsa 112)

id like to hear from anyone who has this setup or close to this setup, anyone who has tried a setup like this and it didnt work for them, or if you know of anyone running this setup... let me know

Thanks

 

95CobraMike

Active Member

Apr 12, 2004

1,046

0

36

Lima OH

Feb 21, 2006

#2

• Feb 21, 2006

• #2

no one has any experience with these heads?

 

Y

yellow1995Cobra

New Member

Dec 23, 2002

2,959

2

0

Massachusetts

Feb 21, 2006

#3

• Feb 21, 2006

• #3

I cant think of any in this forum section with those heads.

Id try the 5.0 section, or the corral.

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Feb 21, 2006

#4

• Feb 21, 2006

• #4

my friend has an 89 gt he had the old iron high ports i believe it had 2.05 valves, you have to run different headers with them, and he had to flycut the pistons.

I am not sure on the chamber size though, so he could have had some really milled heads etc. But i don't think from what i have seen from him that they would work.


I can ask about it though

jason

 

95CobraMike

Active Member

Apr 12, 2004

1,046

0

36

Lima OH

Feb 22, 2006

#5

• Feb 22, 2006

• #5

ok... the ones i was looking at have 2.02 valves and they are aluminum
combustion chambers are 64cc on these...
hummmm

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Feb 22, 2006

#6

• Feb 22, 2006

• #6

flycut

why not just get twisted wedges if you are looking for a deal?

 

95CobraMike

Active Member

Apr 12, 2004

1,046

0

36

Lima OH

Feb 22, 2006

#7

• Feb 22, 2006

• #7

twisted wedges are the plan, i just found some high ports for a really good price...

i am just looking at all of my options

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Feb 22, 2006

#8

• Feb 22, 2006

• #8

my buddy said with his cam .588, .57?, he still had to have the pistons worked... he did say that the heads were 60cc though.... so you might could figure it up... he said he had .125 reliefs put in them...


jason